- ページ 2

ステレオシステム Sony XDR-DS16iPNのPDF リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Sony XDR-DS16iPN 2 ページ。 Personal audio system, dab, dab plus, made for ipod/iphone, avaliable on the app store, no power/no problem
Sony XDR-DS16iPN にも：スタートアップマニュアル (2 ページ), リファレンス・マニュアル (2 ページ), リファレンス・マニュアル (2 ページ)

ページを印刷する

Supporter

Dock

Connector

Power cord

Remote sensor

Wire aerial

VOLUME + (VOL + on the remote control) and  buttons have a tactile dot.

Notes

How to handle an iPod



An iPod in a case or cover can be set on this

unit. However, if the case or cover interferes

with the connection, remove the case or cover

To set an iPod

before setting the iPod on the Dock Connector.



Set the iPod onto the Dock Connector firmly.



When placing or removing the iPod, hold it at

the same angle as the Dock Connector on the

unit. Do not pull the iPod forward too far.



When placing or removing the iPod, hold the

unit securely.



Do not twist or bend the iPod, as this may

result in connector damage.



Remove the iPod when transporting it;

otherwise, a malfunction may result.

To remove an iPod

Repeat step 2 to set the days of the week.

Operating an iPod

You can select the day from the following

three options by pressing TIME SET + or – :

Set the iPod on the Dock Connector.

EVERYDAY: MON TUE WED THU FRI SAT

The Dock Connector can be tilted slightly.

SUN

For details, see "How to handle an iPod. "

WEEKDAY: MON TUE WED THU FRI

Press .

WEEKEND: SAT SUN

The iPod begins to play back.

Press ALARM SET A or B.

If the iPod does not start playing back, operate

The alarm mode setting is entered.

directly on the iPod.

Press TIME SET + or – repeatedly until

You can operate the connected iPod via this

the desired alarm mode flashes.

unit or the iPod itself.

You can choose one of 4 settings: "iPod, "

Adjust the volume using VOLUME + or –

"DAB, " "FM" or "BUZZER. "

(VOL + or – on the remote).

Set the alarm mode as follows:

– iPod: see " To set the alarm as iPod. "

Press

– DAB or FM: see " To set the radio alarm. "

Turn off the iPod

OFF, or press and

– BUZZER: see " To set the buzzer alarm. "

hold 

 To set the alarm as iPod

Pause playback



Perform steps 1 to 8 in "To set the alarm. "

To resume

playback, press it

Press ALARM SET A or B to select

again.

alarm mode for "iPod. "

Go to the next track

 (forward)

"ALARM VOLUME:" and the volume level

Go back to the previous

indication flash in the display.

 (backward)*

track

Press TIME SET + or – to adjust the

Locate a point while

 (forward) or

volume.

listening to the sound

 (backward)

Press ALARM SET A or B.

while playing and

The setting is entered.

hold it until you

If "A" or "B" does not appear in the

find the point.

display, press ALARM SET A or B

Go back to the previous

again.

The iPod will sound at the set time.

Select a menu item or a

 (up)/ (down)

track for playback

on the remote

When using an iPod touch/iPhone

Execute the selected menu



DSPL/ENT

To wake up to music stored in an iPod touch/

or begin playback

(ENTER on the

iPhone, connect the iPod touch/iPhone to the

remote)

unit first, follow the steps above to set alarm

time, then select the music function.

During playback, this operation returns you to



Even if the alarm setting for iPod is complete, if

the beginning of the current track. To go back

you turn the iPod touch/iPhone power off after

to the previous track, press twice.

inserting the iPod touch/iPhone into the unit,

the alarm will be the buzzer.

Notes



If a pop-up message appears in the display of

 To set the radio alarm

the iPod touch or iPhone, see "About App. "



Perform steps 1 to 8 in "To set the alarm. "

Some operations may differ or may not be

available on some models of iPod.

Press ALARM SET A or B to select the



If the iPod is already playing when set onto the

radio band ("DAB" or "FM").

unit, the sound from the iPod will be output

from the unit speakers, even if the unit was

playing sound from another function.



If the battery of the iPod is extremely low,

charge it for a while before operation.



Sony cannot accept responsibility in the event

Preset number

that data recorded to an iPod is lost or damaged

when using the iPod connected to this unit.

The preset number or "--" flashes in the



For details of environmental conditions for

display.

operating an iPod, check the website of Apple

Press TIME SET + or – to set a preset

Inc.

number or "--" as the station to be used



MENU,  (Up),  (Down), and ENTER button

on the main unit and/or on the supplied remote

as the alarm sound.

control will only work with the Apple devices

"DAB --" or "FM --" indicates the last station

(iPhone/iPod touch) installed up to iOS 6. It

received.

will not work with iOS 7 or later. In such case,

Tips

please operate on the screen of Apple devices



If the selected preset number is not set,

directly.

"PRESET BLANK" flashes twice, then

To remove the iPod

"ALARM VOLUME:" and the volume level

indication flash in the display. Then jump to

For details, see "How to handle an iPod. "

the step 5.

To charge an iPod



If there is no last station, "NO LAST

STATION" flashes twice, then "ALARM

You can use the unit as a battery charger for an

VOLUME:" and the volume level indication

iPod.

flash in the display. Then jump to the step

Charging begins when the iPod is connected to

Press ALARM SET A or B.

the unit. The charging status appears in the

"ALARM VOLUME:" and the volume level

display of the iPod. For details, refer to the user's

indication flash in the display.

guide of the iPod.

Press TIME SET + or – to adjust the

volume.

Setting the alarm

Press ALARM SET A or B.

The setting is entered.

This unit is equipped with 3 alarm modes—iPod,

If "A" or "B" does not appear in the

radio and buzzer. The clock needs to be set before

the alarm can be set (see "To set the clock for the

display, press ALARM SET A or B

first time").

again.

To set the alarm

The radio will turn on at the set time.

 To set the buzzer alarm

Press and hold ALARM SET A or B.

"Alarm–A Setting" or "Alarm–B Setting"

Perform steps 1 to 8 in "To set the alarm. "

appears and the hour flashes in the display.

Press ALARM SET A or B to select

Press TIME SET + or – repeatedly until

"BUZZER" alarm mode.

the desired hour appears.

The setting is entered.

To cycle the hour rapidly, press and hold TIME

If "A" or "B" does not appear in the

SET + or –.

display, press ALARM SET A or B

Press ALARM SET A or B.

again.

The minute flashes.

The buzzer will sound at the set time.

Repeat step 2 to set the minute.

Press ALARM SET A or B.

The days of the week flash.

Note

Setting the sleep timer



The volume of the buzzer is not adjustable.

To confirm an alarm time setting

You can fall asleep to music, etc., using the sleep

timer. The unit stops playback or the radio

Press TIME SET + or –. The setting will be

automatically after a preset duration.

displayed for about 4 seconds.

Press SLEEP while the unit is turned on.

To change an alarm setting

"SLEEP:" and the sleep time flash in the

Press and hold TIME SET + for at least 2 seconds

display.

to move the alarm time forwards. Press and hold

Press SLEEP to set the sleep timer

TIME SET – for at least 2 seconds to move the

duration.

alarm time back.

Each time you press SLEEP, the duration (in

When you release the button, the changed time

minutes) changes as follows:

will flash for about 2 seconds. To change the

alarm time again, press TIME SET + or – within

these 2 seconds, otherwise the setting change will

be fixed as displayed.

The display returns to clock mode for about

4 seconds after you have finished the duration

To doze for a few more minutes

setting and released SLEEP, then the sleep

Press SNOOZE/BRIGHTNESS.

timer starts.

The sound turns off but will automatically come

The unit plays for the duration you set, then

on again after about 10 minutes.

stops.

You can change the snooze time by pressing

To turn off the unit before the preset

SNOOZE/BRIGHTNESS repeatedly within 4

time

seconds.

Press OFF.

The maximum length of the snooze time is 60

To change the sleep timer setting

minutes.

You can press SLEEP repeatedly to select the

desired sleep timer setting, even after the sleep

timer has been activated.

To stop the snooze timer, press OFF.

To deactivate the sleep timer

Press SLEEP repeatedly to set the sleep timer to

To stop the alarm

"OFF" in step 2.

Press OFF to stop the alarm.

The alarm will sound again at the same time the

next day.

Connecting optional

To deactivate the alarm

component

Press ALARM ON/OFF A or B to turn off the

alarm A or B indicator in the display.

To listen to sound

To activate the alarm

You can enjoy the sound from an optional

component, such as a portable digital music player,

Press ALARM ON/OFF A or B to turn on the

through the speakers of this unit. Be sure to turn

alarm A or B indicator in the display.

off the power of each component before making

any connections.

Notes

Firmly connect the line output jack of the



When the alarm is set as iPod, only the buzzer

alarm will sound if there is no iPod on the Dock

portable digital music player (or other

Connector, music is not stored in the iPod, or

component) to the AUDIO IN jack on the

the iPod touch/iPhone is turned off.

back of the unit, using a suitable audio



If the selected preset number is not set, or there

connecting cable (not supplied).

is no last station, the buzzer will sound when

Press AUDIO IN to activate the Audio-in

alarm time is met. If you want to change the

buzzer alarm, set a preset station or tune to a

function.

radio station (see "Operating the radio").

"AUDIO IN" appears in the display.



If the same alarm time is set for both alarm A

Turn the connected component on.

and B, alarm A takes priority.

Play the connected component.



If no operation is performed while the alarm is

The sound from the connected component is

occurring, the alarm will stop after about

output from the speakers of this unit.

60 minutes.

Adjust the volume using VOLUME + or –

Note on the alarm in the event of a power

(VOL + or – on the remote).

interruption

To return to the radio

In the event of a power interruption, the buzzer

Press DAB/FM.

alarm will last about 5 minutes if the battery is not

weak.

To return to the iPod

However, certain functions will be affected as

Press .

follows:

To stop listening



The backlight will not light up.



If the alarm mode is set to iPod or radio, it will

Press OFF and stop playback on the connected unit.

change to buzzer automatically.

Notes



If OFF/ALARM RESET is not pressed, the alarm



The MENU cannot be operated while Audio-in

will sound for about 5 minutes.

is used.



If "

" appears in the display, the alarm will not





The necessary type of audio connecting cable

sound in the event of a power interruption.

depends on the optional component. Be sure to

Replace the battery if "



" appears.

use the correct type of cable.



The snooze function cannot be set during a



If the volume level is low, adjust the volume of

power interruption.

the unit first. If the volume is still too low, adjust



During a power interruption, each alarm will

the volume of the connected component.

sound at the set time only once.



Disconnect the audio connecting cable from the

unit when it is not in use.



When you listen to the radio with an optional

component connected, turn off the connected

component to prevent noise. If noise occurs,

even when the component is turned off,

disconnect and place the optional component

away from the unit.

DRC value (DYNAMIC RANGE CONTROL)

Other useful functions

DRC can make quieter sounds easier to hear

when the unit is used in a noisy environment.

For DAB broadcasts with dynamic range

Other useful functions

compression, you can adjust the dynamic range.

Press DAB/FM repeatedly to select the

for DAB

DAB band.

Press MENU and SELECT  or  to

To change the display

To change the display mode, press DSPL/ENT

select "DRC Value, " then press DSPL/

during DAB reception. The selected display mode

ENT (ENTER on the remote).

remains even if you turn the unit off and on again,

Press SELECT  or  to select the DRC

or change the band.

The display can be up to 16 characters. A dynamic

level.

label can be up to 128 characters.

The DRC level changes as follows:

Each time you press DSPL/ENT, the display

changes as follows:

Function and Preset number

Press DSPL/ENT (ENTER on the

remote).

Notes



DRC is effective only for broadcasts with

dynamic range compression.

Component Label



When you adjust the DRC level, sounds can be

heard more clearly.

Dynamic

Auto scan

This function allows you to automatically scan

and create a list of receivable DAB broadcasts.

Press DAB/FM repeatedly to select the

DAB band.

Press MENU and SELECT  or  to

PTY (Programme Type)

select "Auto Scan, " then press DSPL/ENT

(ENTER on the remote).

Press SELECT  or  to select "Yes, " then

press DSPL/ENT (ENTER on the remote).

"Scanning... " appears in the display.

Auto scan takes about 30 - 90 seconds,

Ensemble

depending on the signal strength and station

number. When finished, the unit creates a list in

alphabetical order.

Tip



To cancel Auto scan, press MENU while

processing.

Channel/Frequency/Signal Strength

Note



When Auto scan is performed, the existing list

will be updated and the preset services will be

cleared. In this case, preset your favourite

services again.

Trim stations

You can delete the stations that are not currently

Broadcasting type/Bit/Mode

being received.

Press DAB/FM repeatedly to select the

DAB band.

Press MENU and SELECT  or  to

select "Prune, " then press DSPL/ENT

DAB broadcasting: MP2

(ENTER on the remote).

DAB

broadcasting: AAC

When finished, "FINISH!" appears for about

1 second, then changes to the current station

Notes

automatically.



If there is no dynamic label, the lower line of

the display is blank.

Select station



Depending on the broadcasting station, the

Another service can be selected while listening to

characters in the dynamic label may not be

a broadcast.

displayed properly.

Press MENU and SELECT  or  to

Manual tune

select "Select Station, " then press DSPL/

This function allows you to tune and add various

ENT (ENTER on the remote).

DAB Band-III channels to your station list.

Press SELECT  or  to select a desired

This function can be used to assist the positioning

of the aerial or the unit to obtain the optimum

service, then press DSPL/ENT (ENTER

reception for a specific channel/frequency.

on the remote).

Press DAB/FM repeatedly to select the

DAB band.

Press MENU and SELECT  or  to

select "Manual Tune, " then press DSPL/

ENT (ENTER on the remote).

Press SELECT  or  to select the desired

DAB channel, then press DSPL/ENT

(ENTER on the remote).

The signal strength bars move left and right as

you adjust reception.

Press DSPL/ENT (ENTER on the

remote).

Notes



If the signal of the selected DAB service cannot

be received, no signal strength bars will be

displayed. In this case, press MENU to select

another channel.



The larger signal strength bar indicates the

audio quality threshold. If the signal strength

drops below this threshold, the audio quality

will deteriorate.



A station name is saved to the station list when

the station name starts scrolling in step 3.

PTY (Programme Type)

About App

This function indicates services in programme

A dedicated Dock App for iPod touch/iPhone

type, such as NEWS, SPORTS of the PTY list,

available at Apple App Store.

transmitted in a DAB broadcast.

Search for "D-Sappli" and download the free App

to find out more about the functions.

Programme type

Display

Features

No programme type

None



D-Sappli includes various timer functions:

News

Music Play Timer and Sleep Timer.



Music Play Timer allows you to play/pause

Current Affairs

desired music at a desired time. Sleep Timer

Information

allows you to specify a time at which to stop

Sport

music playback.

Education

Music Play Timer and Sleep Timer are available

Drama

only when D-Sappli is activated.



D-Sappli can display a list of Radio Preset

Culture

Arts

Stations programmed in this unit.

Science

You can rename the FM Radio Preset Stations,

Varied

Talk

and change their preset numbers on the

Pop Music

D-Sappli. Preset numbers and order will also be

Rock Music

changed accordingly in the unit.



D-Sappli also includes a clock display enlarge

Easy Listening Music

Easy Listening

feature.

Light Classical

Serious Classical

Classical Music

Notes

Other Music



If the App to link with this unit is not

Weather/meteorology

Weather

downloaded to the iPod touch/iPhone, a pop-

up message prompting you to download D-

Finance/Business

Finance

Sappli may appear repeatedly.

Children's programmes

Children's

Deactivate the App's link function to stop the

Social Affairs

Factual

pop-up message.

Religion



To deactivate the App's link function: Remove

Phone In

the iPod touch/iPhone from the Dock

Connector. Press  (to enter the function for

Travel

iPod). Press MENU, then press DSPL/ENT

Leisure

(ENTER on the remote). Press  or  to select

Jazz Music

Jazz and Blues

"OFF, " then press DSPL/ENT (ENTER on the

Country Music

remote).

National Music



To re-activate the App's link function, repeat the

above steps and select "ON" instead of "OFF" in

Oldies Music

the last step.

Folk Music

Documentary

Enjoying the bass or

expansion sound effect

Bass and expansion sound effects can be selected

as desired by pressing SOUND.

Each time you press the button, the sound effect

changes as follows:

"MEGA BASS": Provides high quality bass sound.

"MEGA BASS" and "MEGA Xpand": Enables

both effects.

"MEGA Xpand": Expands the sound field width.

To return to standard sound, press the button

until the display of the sound effect disappears.

Setting the brightness

of the display

Four levels of brightness are available by pressing

SNOOZE/BRIGHTNESS. Each time you press the

button, the brightness changes as follows:

Even if brightness level is set to off, it will change

to Low while the alarm is occurring.

Press and hold SNOOZE/BRIGHTNESS to set the

brightness to off directly.