ステレオシステム Sony ZS-RS60BTのPDF 操作説明をオンラインで閲覧またはダウンロードできます。Sony ZS-RS60BT 2 ページ。 Personal audio system
Sony ZS-RS60BT にも： 操作説明 (2 ページ)
ページを印刷する
Personal Audio System
Operating Instructions
©2014 Sony Corporation
ZS-RS60BT
Disposal of waste batteries and electrical and
electronic equipment (applicable in the
European Union and other European countries
with separate collection systems)
This symbol on the product, the battery
or on the packaging indicates that the
product and the battery shall not be
treated as household waste. On certain
batteries this symbol might be used in
combination with a chemical symbol.
The chemical symbols for mercury (Hg) or lead (Pb)
WARNING
are added if the battery contains more than
0.0005% mercury or 0.004% lead. By ensuring these
products and batteries are disposed of correctly, you
To reduce the risk of fire or electric shock, do not
will help prevent potentially negative consequences
expose this apparatus to rain or moisture.
for the environment and human health which could
otherwise be caused by inappropriate waste
To reduce the risk of fire, do not cover the ventilation
opening of the appliance with newspapers,
handling. The recycling of the materials will help to
tablecloths, curtains, etc. Do not expose the
conserve natural resources.
appliance to naked flame sources (for example,
In case of products that for safety, performance or
lighted candles).
data integrity reasons require a permanent
connection with an incorporated battery, this battery
To reduce the risk of fire or electric shock, do not
should be replaced by qualified service staff only. To
expose this apparatus to dripping or splashing, and
ensure that the battery and the electrical and
do not place objects filled with liquids, such as
electronic equipment will be treated properly, hand
vases, on the apparatus.
over these products at end-of-life to the applicable
As the main plug is used to disconnect the unit from
collection point for the recycling of electrical and
the mains, connect the unit to an easily accessible
electronic equipment. For all other batteries, please
AC outlet. Should you notice an abnormality in the
view the section on how to remove the battery from
unit, disconnect the main plug from the AC outlet
the product safely. Hand the battery over to the
immediately.
applicable collection point for the recycling of waste
batteries. For more detailed information about
The unit is not disconnected from the AC power
recycling of this product or battery, please contact
source (mains) as long as it is connected to the wall
your local Civic Office, your household waste
outlet, even if the unit itself has been turned off.
disposal service or the shop where you purchased
Do not install the appliance in a confined space,
the product or battery.
such as a bookcase or built-in cabinet.
For customers in the United Arab
Excessive sound pressure from earphones and
headphones can cause hearing loss.
Emirates
Do not expose the batteries (battery pack or
batteries installed) to excessive heat such as
sunshine, fire or the like for a long time.
The nameplate is located on the bottom exterior.
For customers in Europe
Notice for customers: the following
information is only applicable to equipment
sold in countries applying EU directives
This product has been manufactured by or on behalf
Personal Audio System is designed to be used
of Sony Corporation, 1-7-1 Konan Minato-ku Tokyo,
for playing back music sources on CDs or USB
108-0075 Japan. Inquiries related to product
devices, transferring music to USB devices,
compliance based on European Union legislation
listening to radio stations, and listening to music
shall be addressed to the authorized representative,
on BLUETOOTH devices.
Sony Deutschland GmbH, Hedelfinger Strasse 61,
70327 Stuttgart, Germany. For any service or
guarantee matters, please refer to the addresses
provided in the separate service or guarantee
documents.
Power Sources
Connect the AC power cord
, or insert six R14 (size C) batteries (not supplied) into the battery compartment
To a wall outlet
AC power cord (supplied)
To AC IN
Rear
Notes
When using the radio on batteries and the battery power drops to a certain level, the OPR/BATT indicator
of the radio may go off during playback. If this happens, replace all the batteries with new ones. Even after the OPR/BATT
indicator
becomes dim, you can use the radio function for some time, although you cannot use the CD player. Before you
replace the batteries, be sure to remove any CD and disconnect any USB devices or optional components from the unit.
To use the unit on batteries, disconnect the AC power cord from the unit and the wall outlet.
In standby mode with the AC power cord connected, "STANDBY" appears on the display.
To use the power-management function (European models only)
This unit is equipped with an automatic standby function. With this function, the unit enters standby mode
automatically after about 15 minutes if there is no operation or audio signal output.
To turn standby mode on or off, press VOL
while holding down
. Each time you press the buttons,
"AUTO STANDBY ON" or "AUTO STANDBY OFF" appears on the display.
Notes
The displayed content starts flashing on the display about 2 minutes before entering standby mode.
The automatic standby function is not available with the FM/AM function.
Basic Operations
4-559-899-12(1)
Printed in China
*
and VOL +
have a tactile dot.
WMA files encoded in WMA DRM, WMA Lossless and
Before using the unit
This unit cannot play audio files on a disc in the following
To turn the power on or off
Press OPERATE
. You can also turn on the power
of this unit using the direct power-on function
(below).
In this manual, operations are mainly explained
Folder names can be displayed with up to 32 characters,
using the direct power-on function.
File names can be displayed with up to 32 characters,
To use the direct power-on function
Press CD
, USB
, BLUETOOTH
, FM/AM
,
Characters and symbols that cannot be displayed by the
AUDIO IN
or FAVORITE RADIO STATIONS (1-3)
while the unit is turned off. The power turns on with
This unit conforms to version 1.0, 1.1, 2.2, 2.3 and 2.4 of the
the relevant function selected.
To adjust the volume
Press VOL + or
.
To listen through headphones
Connect headphones to the (headphones) jack
.
To reinforce the bass
Press MEGA BASS
.
"MEGA BASS" lights up on the display.
Listening to music on a USB device
To return to normal sound, press the button again.
You can listen to audio files stored on a USB device
(a digital music player or USB storage media).
Playing a music disc
Audio files in MP3, WMA and AAC formats* can be
played on this unit.
1
Press CD
to turn on the CD function.
* Files with copyright protection (Digital Rights
2
Press PUSH OPEN/CLOSE
, place a disc in
the CD compartment and then close the
1
compartment cover.
2
Label side up
3
The disc is loaded and the disc information
appears on the display.
Audio CD
Total number of tracks
Total playing time
MP3/WMA disc
Other operations
To
Pause playback
Total number of folders*
Stop playback
* If MP3/WMA files are present only in the root directory
("ROOT" folder), "1FLDR" appears on the display.
3
Press
to start playback.
.
Track number or MP3/WMA file
number
Select a folder
Select a file
Playing time
When you play an MP3/WMA disc, the folder
Find a point in a
name*
1
and song title are displayed before the
file
playing time*
2
appears.
*
1
If MP3/WMA files are present only in the root directory,
"ROOT" appears on the display.
*
2
If the playing time is longer than 100 minutes, "--:--"
appears on the display.
Other operations
* When playing a VBR MP3/WMA/AAC file, playback may
To
Do this
Press . To return to
Note
Pause playback
When removing a USB device, hold down
playback, press the button
DEV" appears, and then turn off the unit or switch to other
again.
functions beforehand. Removing the USB device without
Press . When you press
Stop playback
performing these steps may corrupt the data on the USB
after playback is stopped,
device or damage the device itself.
playback starts from the point
Example of folder structure and playing order
where you stopped playback
The playing order of the folders and files is as
(Resume Play).
follows. However, the playing order may differ from
Select a folder
+ or .
the original order on the USB device, depending on
Press
dims or the power
on an MP3/WMA
the recording method used.
disc
USB device
Press or . You can
Select a track/
file
skip tracks/files one by one.
Find a point in a
Hold down or
track/file
during playback, and release the
button at the desired point.
When locating a point while
paused, press to start
playback after the desired point
is found.
Tip
To cancel the Resume Play, press
while the CD is
stopped.
Note
Resume Play is cancelled in the following cases:
When you open the CD compartment.
When you turn off the power.
Example of folder structure and playing order
Notes on the USB device
The playing order of the folders and files is as
It may take a long time before playback starts when:
follows. However, the playing order may differ from
the original order on the disc, depending on the
recording method used.
Do not save non-MP3/WMA/AAC files or unnecessary
Folder
During playback, audio files other than MP3, WMA and
MP3/WMA file
The audio formats supported by this unit are as follows:
MP3 PRO format is not supported.
WMA files encoded in WMA DRM, WMA Lossless and
AAC files encoded in copyright-protected AAC format
This unit supports the AAC-LC (AAC Low Complexity)
This unit cannot play audio files on a USB device in the
Notes on MP3/WMA discs
When a disc is loaded, the unit reads all the files on that
disc. During this time, "READING" is flashing. If there are
many folders or non-MP3/WMA files on the disc, it may
take a long time for play to begin or for the next MP3/
WMA file to start to play.
We recommend that non-MP3/WMA files or unnecessary
folders are excluded when creating MP3/WMA discs.
During playback, audio files other than MP3 and WMA
files are skipped even if those files are included in a folder.
The audio formats supported by this unit are as follows:
Compatibility with all encoding/writing software is not
MP3: File extension ".mp3"
WMA: File extension ".wma"
Note that even if the file name has the correct file
extension but the actual file was created in a different
audio format, this unit may produce noise or may
malfunction.
MP3 PRO format is not supported.
Folder names can be displayed with up to 32 characters,
including quotation marks.
File names can be displayed with up to 32 characters,
including quotation marks and file extensions.
Characters and symbols that cannot be displayed by the
unit will appear as "_".
This unit conforms to version 1.0, 1.1, 2.2, 2.3 and 2.4 of the
ID3 tag format for MP3 files, the WMA tag format defined
by the ASF specification (Advanced Systems Format) for
WMA files, and the AAC tag format for AAC files.
When a file has the ID3, WMA or AAC tag information, the
song title, artist name, and album name will be displayed.
If a file does not have the tag information, the unit
displays as follows:
File name instead of the song title.
"NO ARTIST" message instead of the artist name.
"NO ALBUM" message instead of the album name.
ID3, WMA and AAC tag information can be displayed up to
64 characters.
Transferring music from a disc to a
USB device
You can transfer a whole disc (CD SYNC transfer) or
WMA PRO formats cannot be played back.
the currently playing track or file (REC1 transfer) to a
USB device (digital music player or USB storage
cases:
When the total number of audio files exceeds 999.
media, etc.).
When the total number of folders on a single disc
When transferring from a CD, the tracks are
exceeds 256 (including the "ROOT" folder).
transferred as MP3 files with a sampling frequency
When the directory level (folder depths) exceeds 8
of 44.1 kHz at 128 kbps (CBR). When transferring
(including the "ROOT" folder).
from an MP3/WMA disc, MP3/WMA files are
transferred with the same bit rate as the original
including quotation marks.
MP3/WMA files.
1
including quotation marks and file extensions.
Connect the USB device to the (USB) port
2
Press CD
to turn on the CD function.
unit will appear as "_".
3
Place the disc you want to transfer in the CD
compartment.
ID3 tag format for MP3 files and the WMA tag format
defined by the ASF specification (Advanced Systems
CD SYNC transfer
Format) for WMA files. When a file has the ID3 or WMA tag
information, the song title, artist name, and album name
To transfer a whole disc
will be displayed. If a file does not have the tag
Proceed to step 4.
information, the unit displays as follows:
File name instead of the song title.
To transfer MP3/WMA files in a specific
"NO ARTIST" message instead of the artist name.
folder
"NO ALBUM" message instead of the album name.
Set the play mode to folder play (
ID3 and WMA tag information can be displayed up to 64
repeat play (
,
), and then press
characters.
repeatedly to select the folder you want.
To transfer only your favorite tracks/files
Perform step 1 to 5 of "Creating your own
program (Program Play)" on the back page.
REC1 transfer
To transfer a single track/file
Select and start playback of the track/file you
want to transfer.
Management) cannot be played on this unit.
4
Press REC
.
Connect the USB device to the (USB) port
.
"REC" flashes on the display and the unit starts
Press USB
to turn on the USB function.
calculating the amount of free space on the USB
The volume label scrolls once, then the total
device.
number of folders appears on the display.
If "LOW ***M" appears on the display, there is not
Total number of folders
sufficient space on the device. To cancel the
transferring, press
. To continue transferring
Press
to start playback.
anyway, proceed to step 5.
The folder name and song title are displayed, and
5
Press ENTER
.
then the file number and playing time appear.
Transferring starts.
File number
When transferring is completed, playback stops
automatically (CD SYNC transfer) or proceeds to
the next track/file (REC1 transfer).
To stop transferring
Press .
Playing time*
When the transferring source is a CD-DA track, the
audio file is generated up to the point the
* If the playing time is longer than 100 minutes, "--:--"
transferring was stopped. When the source is an
appears on the display.
MP3 or WMA file, the file that is currently being
transferred is not generated.
Folder and file generation rules
Do this
When first transferring to a USB device, a "MUSIC"
Press . To return to
folder and its sub folder "SONY" are created directly
playback, press the button
below the "ROOT" folder.
again*.
Folders and files are generated within the "CD"
Press . When you press
folder under the "SONY" folder based on the
after playback is stopped,
following rules.
playback starts from the point
CD SYNC transfer
where you stopped playback
(Resume Play).
Transferring
Folder name
+ or .
source
Press
Press or . You can
MP3/WMA
Same as the transferring source*
skip files one by one.
CD-DA
"ALBUM001"*
3
To skip files continuously, hold
down or and
REC1 transfer
release the button at the desired
file.
Transferring
Folder name
source
Hold down or
during playback, and release the
MP3/WMA
button at the desired point.
"REC1"*
5
When locating a point while
paused, press to start
CD-DA
playback after the desired point
*
1
In Program Play mode, the folder name is "FLDRxxx," and
is found.
the file name depends on the transferring source.
*
2
Up to 32 characters (including a file extension for a file
restart from a different point.
name) can be displayed.
*
3
Folder names are assigned in sequential order up to a
maximum of 256 (including the "ROOT" and "MUSIC"
until "NO
folders).
*
4
File names are assigned in sequential order.
*
5
A new file is transferred to the "REC1" folder each time
single track transfer is performed.
To erase audio files or folders from the USB
device
1
Press
or
repeatedly to select an
audio file, or press
+ or –
select a folder.
Folder
2
Press ERASE
.
MP3/WMA/AAC file
"ERASE?" appears on the display.
3
Press ENTER
.
"TRACK ERASE?" or "FOLDER ERASE?" appears on
the display.
4
Press ENTER
.
The selected audio file or folder is erased, and
"COMPLETE" appears on the display.
Notes
If you start transferring in shuffle play or repeat play
mode, the selected play mode is automatically changed
to normal play.
Do not remove the USB device during transferring or erase
operations. Doing so may corrupt the data on the device
or damage the device itself.
While transferring, no sound is output and "HI-SPEED"
appears on the display.
CD-TEXT information is not transferred in the created MP3
files.
Transferring stops automatically if:
the USB device runs out of space during transferring.
the folder structure is complex.
the number of audio files and folders on the USB device
the USB device is close to capacity.
reaches the limit that the unit can recognize.
Non-MP3/WMA/AAC format files or sub folders in the
folders to a USB device that contains MP3/WMA/AAC files.
folder are not erased.
Radio sound and sound from an optional component
AAC files are skipped even if those files are included in a
cannot be transferred to a USB device.
folder.
Note on copyright-protected content
MP3: file extension ".mp3"
The transferred music is limited to private use only. Use of
WMA: file extension ".wma"
the music beyond this limit requires permission from the
AAC: file extension ".m4a," ".3gp" and ".mp4"
copyright holders.
Note that even if the file name has the correct file
extension but the actual file was created in a different
audio format, this unit may produce noise or may
malfunction.
WMA PRO formats cannot be played back.
cannot be played back.
profile.
following cases:
When the total number of audio files in a single folder
exceeds 999.
When the total number of audio files on a single USB
device exceeds 5,000.
When the total number of folders on a single USB
device exceeds 256 (including the "ROOT" folder).
When the directory level (folder depths) exceeds 8
(including the "ROOT" folder).
These numbers may vary depending on the file and folder
structure.
guaranteed. If audio files on the USB device were
originally encoded with incompatible software, those files
may produce noise or interrupted sound, or may not be
played back at all.
4
Touch the unit with the smartphone.
Listening to music wirelessly on a
Keep touching the smartphone to the N mark
on the unit until the smartphone responds.
BLUETOOTH device
Note
If your smartphone screen is locked, the smartphone will
Using the BLUETOOTH connection, you can listen to
not function. Release the lock, then touch the
music from wirelessly connected BLUETOOTH
smartphone to the N mark again.
devices such as mobile phones, smartphones, music
players, etc.
Follow the on-screen instructions to establish the
connection.
Pairing this unit with a
When the BLUETOOTH connection is established,
BLUETOOTH device
"BT AUDIO" appears on the display.
BLUETOOTH devices must be "paired" with each
other beforehand. Once BLUETOOTH devices are
paired, there is no need for pairing again, unless the
pairing information is cleared.
Choose the pairing method below depending on
Tips
your device.
If it is difficult to establish the connection, try the
Pairing with an NFC-incompatible BLUETOOTH
device:
see
Pattern A
.
Pairing with an NFC-compatible smartphone:
Touch the unit with the smartphone again to
see
Pattern B
If you have multiple NFC-compatible devices, just
Pattern A
Pairing with an NFC-incompatible
BLUETOOTH device
Keep the BLUETOOTH device and the unit within 1
meter of each other for this operation.
Listening to music
1
Press BLUETOOTH
to turn on the
) or folder
BLUETOOTH function.
Check the following before operating the unit.
+ or
If no devices have been paired, such as when you
The BLUETOOTH function of the BLUETOOTH
press BLUETOOTH
for the first time after you
device is turned on.
purchase the unit, the unit automatically enters
Pairing has been completed. (See "Pairing this unit
pairing mode, and the BLUETOOTH indicator ( )
with a BLUETOOTH device".)
and "PAIRING" flash on the display.
1
Make the BLUETOOTH connection between
the unit and the device.
For an NFC-incompatible BLUETOOTH
device
When pairing with two or more
Press BLUETOOTH
BLUETOOTH devices
function.
Hold down BLUETOOTH (–PAIRING)
until two
The last connected device will be connected
beeps are heard.
automatically.
2
Turn on the BLUETOOTH function of the
For an NFC-compatible smartphone
BLUETOOTH device.
Touch the smartphone to the N-Mark
3
unit.
Perform the pairing procedure on the
BLUETOOTH device to detect the unit.
2
Start playback of an audio source such as
4
Select "ZS-RS60BT" shown on the display of
music, videos, games, etc., on the device.
the BLUETOOTH device.
Refer to the instruction manual of your device for
If "ZS-RS60BT" does not appear on the device's
details on playback operations.
display, repeat from step 2.
Tip
5
If Passcode* input is required on the display of
To adjust the volume, set the volume of the BLUETOOTH
the BLUETOOTH device, input "0000."
device or the smartphone to the moderate level, and then
press VOL or +
The BLUETOOTH connection is established.
"BT AUDIO" appears on the display.
To terminate a BLUETOOTH connection
* "Passcode" may be referred to as "Passkey," "PIN code,"
Do any of following.
"PIN number," or "Password."
Turn off the BLUETOOTH function of the
BLUETOOTH device. For details, refer to the
operating instructions supplied with the device.
Turn off the BLUETOOTH device.
Change the function of the unit.
Tip
Turn off the unit.
You can pair up to 8 BLUETOOTH devices. If the 9th
Touch the unit with the smartphone again to
BLUETOOTH device is paired, the oldest paired device will be
disconnect (NFC-compatible smartphones only).
deleted.
To clear the paired device information
Notes
Pairing mode of the unit is cancelled after about
1
Hold down ERASE
5 minutes, and the BLUETOOTH indicator (
) flashes. If
on the display.
pairing mode is cancelled while performing this
procedure, start over from step 1.
2
Press ENTER
The passcode of the unit is fixed as "0000." The unit
When the paired device information is cleared,
cannot be paired with a BLUETOOTH device whose
"COMPLETE" appears on the display. To cancel
Passcode is not "0000."
the reset operation, press .
Pattern B
File name
Pairing with an NFC-compatible
1, 2
smartphone
"TRACK001"*
4
By just touching the unit with an NFC-compatible
smartphone, the unit is turned on and switched to
the BLUETOOTH function automatically and then
paired and connected to the smartphone.
File name
Compatible smartphones
Same as the
Smartphones with the NFC function built-in
transferring
(OS: Android™ 2.3.3 or later, excluding Android 3.x)
2
source*
What is "NFC"?
"TRACK001"*
4
NFC (Near Field Communication) is a
technology enabling short-range wireless
communication between various devices,
such as mobile phones and IC tags. Thanks to
the NFC function, data communication can be
achieved easily just by touching the relevant
symbol or designated location on NFC
compatible devices.
1
Turn on the NFC function of the smartphone.
For details, refer to the operating instructions
supplied with the smartphone.
If your smartphone OS is Android 2.3.3 or
later, but earlier than Android 4.1
repeatedly to
Proceed to step 2.
If your smartphone OS is Android 4.1 or
later
Proceed to step 4.
2
Download and install the app "NFC Easy
Connect" on the smartphone.
"NFC Easy Connect" is an original app by Sony for
Android phones, and is available at the Google
Play™ Store.
Search for "NFC Easy Connect" or scan the
following two-dimensional code to download
and install the free app. Communication fees are
required to download the app.
The App may not be available in some countries
and/or regions.
Tip
For some smartphones, One-touch connection may be
available without downloading the app "NFC Easy
Connect." In that case, the operation and specifications
may be different from the description here. For details,
refer to the operating instructions supplied with the
smartphone.
For the two-dimensional code:
Use a two-dimensional code reader app.
3
Start the app "NFC Easy Connect" on the
smartphone.
Make sure that the application screen is
displayed.
Listening to the radio
1
Press FM/AM
repeatedly to turn on the
radio function and select the band "FM" or
"AM."
2
Hold down TUNE + or
until the frequency
Smartphone responds
digits begin to change on the display.
(unit recognized)
The unit automatically scans the radio
frequencies and stops when it finds a clear
station.
If you cannot tune to a station using automatic
tuning mode, press TUNE + or
change the frequency step by step.
When an FM stereo broadcast is received, "ST"
lights up on the display.
Note
The unit of frequency of tuned stations is MHz for the FM
band and kHz for the AM band.
To change the FM/AM tuning interval
(This function is only available on models for some
countries/regions. See the radio section in
"Specifications.")
The FM/AM tuning interval can be changed if
necessary using the following procedure.
1
Press FM/AM
repeatedly to select a band.
2
Hold down ENTER
until "FM-xx" or "AM-xx"
following.
flashes on the display.
Activate the app "NFC Easy Connect" and move the
3
smartphone slightly across the N mark
on the
Hold down FM/AM
until the current tuning
unit.
step appears.
If the smartphone is in a case, remove it.
4
Press
or
to select the desired
tuning step.
disconnect.
"FM 50K" (for 50 kHz interval) or "FM 100K" (for
touch the smartphone to a different device to switch
100 kHz interval) in the FM band, and "AM 9K" (for
the connection to that device. For example, when your
9 kHz interval) or "AM 10K" (for 10 kHz interval) in
smartphone is connected with NFC-compatible
the AM band can be selected.
headphones, just touch the smartphone to the unit to
5
Press ENTER
.
change the BLUETOOTH connection to the unit
(One-touch connection switching).
Changing the tuning interval erases all the FM/AM
preset stations stored in the unit. Reset your preset
stations after changing the tuning interval.
To improve radio reception
Use the radio in a place where
radio signals can be easily
received, such as near a window.
Also, adjust the antenna (FM) or
reorient the unit itself (AM) for
good reception.
Adjust the antenna to
improve FM reception. If the
stereo FM reception is noisy,
press FM MODE
until "MONO" appears on the
to turn on the BLUETOOTH
display. You will lose the
stereo effect, but the
reception will be improved.
Reorient the unit
on the
itself to improve AM
reception. (A ferrite
bar antenna is built
in the unit.)
If the reception problem still persists, try changing
the installation location.
Avoid places such as the following:
on the unit.
Between
buildings
Nearby
mobile
phones,
electrical
appliances
until "BT RESET" appears
On steel desks
.
or tables
Presetting stations to FAVORITE
RADIO STATIONS
You can preset up to three favorite stations to
FAVORITE RADIO STATIONS (1-3) buttons. Assign one
FM or AM program for each button.
1
Press FM/AM
repeatedly to turn on the
radio function and select the band "FM" or
"AM."
2
Tune to the station you want to preset.
3
Press and hold the desired FAVORITE RADIO
STATIONS (–SET) (1-3) button
a beep.
The tuned station is preset to the selected button
of FAVORITE RADIO STATIONS (1-3) and the same
number as that of the button will light up on the
display.
(Example: Presetting FM 87.50 MHz to number )
To change the preset station
Repeat steps 1 to 3.
The preset station on the button will be replaced by
the new one.
Listening to preset stations with
FAVORITE RADIO STATIONS
Press the desired FAVORITE RADIO STATIONS (1-3)
button
.
Note
To prevent the preset from being changed by mistake, do
not hold down the button. If doing so, the preset on the
button will be replaced by the currently tuned station.
repeatedly to
repeatedly
until you hear