- ページ 21
ステレオシステム Sony ZS-X3CP Marketing Specifications & FeaturesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Sony ZS-X3CP Marketing Specifications & Features 28 ページ。 S2 sports cd/radio tuner
Sony ZS-X3CP Marketing Specifications & Features にも： 仕様 (2 ページ)
ページを印刷する
On operation
• If the player is brought directly from a
cold to a warm location, or is placed in a
very damp room, moisture may condense
on the lens inside the CD player section.
Should this occur, the player will not
operate properly. In this case, remove the
CD and wait about an hour for the
moisture to evaporate.
If you have any questions or problems
concerning your player, please consult your
nearest Sony dealer.
Notes on CDs
• Before playing, clean the CD with a
cleaning cloth. Wipe the CD from the
center out.
• Do not use solvents such as benzine,
thinner, commercially available cleaners
or anti-static spray intended for vinyl LPs.
• Do not expose the CD to direct sunlight or
heat sources such as hot air ducts, nor
leave it in a car parked in direct sunlight
as there can be a considerable rise in
temperature inside the car.
• Do not stick paper or sticker on the CD,
nor scratch the surface of the CD.
• After playing, store the CD in its case.
If there is a scratch, dirt or fingerprints on
the CD, it may cause tracking error.
Troubleshooting
General
The power is not on.
• Connect the AC power adaptor to a wall
outlet securely.
• Make sure the batteries are inserted correctly.
The power is not on, and "Low Battery" is
displayed.
• Replace all the batteries with new ones if
they are weak.
The power is not on, and "Battery Error"
is displayed.
• Make sure the batteries are inserted correctly.
There is no audio.
• Make sure the function you want to use
appears in the display window.
• Adjust the volume.
• Unplug the headphones when listening
through speakers.
Noise is heard.
• Someone is using a portable telephone or
other equipment that emits radio waves near
the player. t Move the portable telephone,
etc., away from the player.
CD Player
"No disc" lights in the display even when
a CD is in place.
• Insert the CD with the label surface up.
• The CD-R/CD-RW is blank.
• The CD-R/CD-RW was not finalized.
Finalize the CD-R/CD-RW with the
recording device.
• There is a problem with the quality of the
CD-R/CD-RW, recording device, or
application software.
continued
21