- ページ 6

ネットワーク・ハードウェア Cisco ASR 5000 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco ASR 5000 Series 12 ページ。

Cisco NCS 5011

The Cisco NCS 5011 router is also an extension to Cisco's routing platform portfolio enabling Service Providers

and MPLS enabled data center architectures to offer elastic networks with improved business agility and

simplified operations to deliver high-bandwidth mobile, video, and cloud services.

The Cisco NCS 5011 router consists of 32 QSFP+/QSFP28 ports. The NCS 5011 system supports 10GE,

25GE, 40GE, 50GE, and 100GE.

The Cisco NCS 5011 system extends 4x10G, 4x25G, and 2x50G breakout support for Copper Optics.

Configure Breakout

Log into the router in the config mode, and type the following command (in this example, the breakout optics

is inserted in port 0):

RP/0/RP0/CPU0:router(config)# controller optics 0/0/0/0 breakout 4x10

RP/0/RP0/CPU0:router(config)# controller optics 0/0/0/0 breakout 4x25

RP/0/RP0/CPU0:router(config)# controller optics 0/0/0/0 breakout 2x50

Note

• The broken out interfaces are named as follows:

• The above commands fail if the optics inserted do not support breakout. Only copper optics are currently

• The commands succeed if there are no optics inserted, and the breakout is executed whenever optics are

Overview

• tenGigE 0/0/0/0/0, tenGigE 0/0/0/0/1, tenGigE 0/0/0/0/2, and tenGigE 0/0/0/0/3

• twentyFiveGigE 0/0/0/0/0, twentyFiveGigE 0/0/0/0/1, twentyFiveGigE 0/0/0/0/2, and twentyFiveGigE

0/0/0/0/3

• FiftyGigE 0/0/0/0/0, FiftyGigE 0/0/0/0/1

supported.

inserted at a later stage.

Overview