- ページ 28

ネットワーク・ハードウェア Cisco ASR 5500のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco ASR 5500 31 ページ。
Cisco ASR 5500 にも：インストール手順の概要 (6 ページ)

ページを印刷する

Using the Protocol Monitor for a Specific Subscriber

Step 5

Repeat step 6 as needed to enable or disable multiple protocols.

Step 6

Press Enter to refresh the screen and begin monitoring.

The following displays a portion of a sample of the monitor's output for a subscriber named user2@aaa. The default

protocols were monitored.

---------------------------------------------------------------------------

Incoming Call:

---------------------------------------------------------------------------

MSID: 0000012345 Callid: 002dc6c2

Username: user2@aaa SessionType: unknown

Status: Active Service Name: xxx1

Src Context: source Dest Context:

---------------------------------------------------------------------------

<<<<OUTBOUND 10:02:35:415 Eventid:25001(0)

PPP Tx PDU (9)

PAP 9: Auth-Ack(1), Msg=

<<<<OUTBOUND 10:02:35:416 Eventid:25001(0)

PPP Tx PDU (14)

IPCP 14: Conf-Req(1), IP-Addr=192.168.250.70

<<<<OUTBOUND 10:02:35:416 Eventid:25001(0)

PPP Tx PDU (27)

CCP 27: Conf-Req(1), MPPC, Stac-LZS, Deflate, MVRCA

INBOUND>>>>> 10:02:35:517 Eventid:25000(0)

PPP Rx PDU (30)

IPCP 30: Conf-Req(1), IP-Comp VJ-Comp, IP-Addr=0.0.0.0, Pri-DNS=0.0.0.0,

Sec-DNS=0.0.0.0

<<<<OUTBOUND 10:02:35:517 Eventid:25001(0)

PPP Tx PDU (26)

IPCP 26: Conf-Rej(1), IP-Comp VJ-Comp, Pri-DNS=0.0.0.0, Sec-DNS=0.0.0.0

INBOUND>>>>> 10:02:35:517 Eventid:25000(0)

PPP Rx PDU (12)

IPCP 12: Conf-Ack(1), IP-Addr=192.168.250.70

INBOUND>>>>> 10:02:35:518 Eventid:25000(0)

PPP Rx PDU (31)

LCP 31: Prot-Rej(1), Rejected-Protocol=CCP (0x80fd)

INBOUND>>>>> 10:02:35:518 Eventid:25000(0)

PPP Rx PDU (12)

IPCP 12: Conf-Req(2), IP-Addr=0.0.0.0

<<<<OUTBOUND 10:02:35:518 Eventid:25001(0)

PPP Tx PDU (14)

IPCP 14: Conf-Nak(2), IP-Addr=192.168.250.87

INBOUND>>>>> 10:02:35:519 Eventid:25000(0)

PPP Rx PDU (12)

IPCP 12: Conf-Req(3), IP-Addr=192.168.250.87

The monitor remains active until disabled. To quit the protocol monitor and return to the prompt, press q.

Troubleshooting