- ページ 6

音楽ミキサー ACU-RITE MILLPWR G2のPDF ソフトウェア・アップデートをオンラインで閲覧またはダウンロードできます。ACU-RITE MILLPWR G2 6 ページ。
ACU-RITE MILLPWR G2 にも：ソフトウェア・アップデート (6 ページ), ソフトウェア・アップデート (6 ページ), ソフトウェア・アップデート (6 ページ)



Improved the scenario in which a network share drive is lost when it is the current location in

Program Functions. The chances of the system becoming unresponsive for a few minutes have

been reduced.



The previously set tool parameters (dia, length, etc.) are restored on power-up. This corrects an

error in which the wrong tool parameters may be loaded after a power cycle.



Corrected an issue in the PLC in which the spindle could momentarily start after pressing the

STOP key after opening and then closing the guards.

If any issues are encountered, please contact your service representative for assistance or

contact technical support at

if you have any questions.