- ページ 5

ラック＆スタンド CablesPlus VH-001SのPDF インストラクションシートをオンラインで閲覧またはダウンロードできます。CablesPlus VH-001S 5 ページ。

Step 14: Assembling the extension

holders

Step 15 : Applying Velcro

Step 16 : Securing the equipment

in the VH-001 (VH-001 is shown

without being attached to a

mount for clarity)

Step 14

Now that the VH-001 force arm

assemble the rest of the VH-001. First attach the non-skid padding

VH-001 to the adjustable stopper

adjustable stoppers

VH-001 to the extension holder

using the butterﬂ y nuts and ¼" – 20UNC screws

Step 15

Take the Velcro

VH-001 and apply it to the equipment you are go-

ing to place in the VH-001 and on the extension holders

You should apply the Velcro to the bottom left and right sides of your

equipment along the edges.

Step16

Insert the extension holders

Slide the desired equipment in between the adjustable stoppers and

both extension holders

the extension holders by tightening down brake screws

into the force arm while making sure the equipment is centered in

the bracket. Lastly, slide the adjustable stoppers down onto the top

of the equipment and tighten.

Please verify that all nuts and screws are securely tightened.

Enjoy Your Mount!

WARNING: The installer of these products must verify that the mount-

ing surface, ceiling or wall, will safely support the combined weight

of all attached equipment and hardware. Video Mount Products will

not be held liable for the improper use or installation of its products.

VH-001 is attached, it is time to

VH-001. Next attach the

and

VH-001 into the force arm

and

VH-001. Secure the position of

VH-001

VH-001.

VH-001