ネットワーク・ハードウェア Cisco ASR 9000 SeriesのPDF 設定をオンラインで閲覧またはダウンロードできます。Cisco ASR 9000 Series 46 ページ。 Line card
Cisco ASR 9000 Series にも：ネットワーク設定の構成 (26 ページ), 設定マニュアル (46 ページ), 設定マニュアル (50 ページ), マニュアル (24 ページ), マニュアル (44 ページ), クイック・リファレンス・マニュアル (7 ページ)

Configuring Channelized SONET/SDH on the

Cisco ASR 9000 Series Router

This module describes the configuration of Channelized SONET/SDH on the Cisco ASR 9000 Series

Aggregation Services Routers.

Feature History for Configuring Channelized SONET/SDH on Cisco IOS XR Software

Release

Release 3.9.0

Release 4.0.0

Release 4.0.1

Contents

•

Prerequisites for Configuring Channelized SONET/SDH

You must be in a user group associated with a task group that includes the proper task IDs. The command

reference guides include the task IDs required for each command. If you suspect user group assignment

is preventing you from using a command, contact your AAA administrator for assistance.

OL-26061-03

Modification

Support for the following SPA was introduced on the

Cisco ASR 9000 Series Router:

•

Support for the following SPA was introduced on the

Cisco ASR 9000 Series Router:

•

Support for SDH, E3, E1, and POS channelization was added for the

Cisco 2-Port Channelized OC-12/DS0 and Cisco 1-Port Channelized

OC-48/STM-16 SPAs.

Support for the following SPA was introduced on the

Cisco ASR 9000 Series Router:

•

Prerequisites for Configuring Channelized SONET/SDH, page 317

Information About Configuring Channelized SONET/SDH, page 318

How to Configure Channelized SONET/SDH, page 327

Configuration Examples for Channelized SONET, page 354

Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide

Cisco 2-Port Channelized OC-12/DS0 SPA

Cisco 1-Port Channelized OC-48/STM-16 SPA

Cisco 1-Port Channelized OC-3/STM-1 SPA

HC-317