- ページ 4

ネットワーク・ハードウェア Cisco ATA 191のPDF スタートをオンラインで閲覧またはダウンロードできます。Cisco ATA 191 8 ページ。 Analog telephone adapter
Cisco ATA 191 にも：ユーザーマニュアル (30 ページ), 管理マニュアル (4 ページ), ユーザーマニュアル (10 ページ), マニュアル (10 ページ), クイック・スタート・マニュアル (13 ページ), セットアップマニュアル (6 ページ), ユーザーマニュアル (40 ページ), ユーザーマニュアル (30 ページ)

Devices Associated with Your ATA

Use your ATA to connect these types of devices to your network:

• Analog phones

• Analog telephony voice devices

• Overhead paging systems

• Fax machines

Your ATA comes with everything to power it up, connect it to the network, and set it up on your desk.

Before you begin

Before you begin the installation, make sure you have the following equipment:

• Ethernet cable to connect to your network.

• Analog phone or fax machine to connect to your ATA.

• Phone cable to connect your phone.

• Uninterruptible power supply (UPS) to provide backup power.

Procedure

Step 1

Connect the network cable to your network and to the NETWORK port on the ATA.

Get Started with Your New ATA

• Analog phones have no softkeys.

• The information that analog phones display depends on the model you have.

• You use the phone's flash button for hold, resume, transfer, and conference.

• The ATA supports analog telephony voice devices, such as overhead paging adapters and answering

machines, that emulate a regular phone.

• Overhead paging systems provide alarms and public-address announcements in buildings.

• Use a fax machine directly with an ATA. Don't connect an extension to a fax machine, and don't

use the fax machine with a splitter.

• To reduce fax failures, use overseas mode, if available; if not, set the fax machine transmission

speed to low.

• Data devices, such as facsimile machines and modems, may not function optimally. For the best

fax and modem performance, continue to use a dedicated PSTN line.

Get Started with Your New ATA