- ページ 26
ネットワーク・ハードウェア Cisco Catalyst 8300 SeriesのPDF ハードウェア・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Catalyst 8300 Series 46 ページ。 Edge ucpe
ページを印刷するInstalling the Cisco Catalyst 8300 Series Edge uCPE
Figure 6. Mounting the Chassis on the Rack- Front (I/O face) shown for 23"
R M
1
2
Tip
The screw slots in the brackets are spaced to line up with every second pair of screw holes in the rack. When
the correct screw holes are used, the small threaded holes in the brackets line up with unused screw holes in
the rack. If the small holes do not line up with the rack holes, you must raise or lower the brackets to the next
rack hole.
4-point Mounting in a Cabinet
4-point mounting is supported for 19" cabinets that require rear-support of the device. A range of rear-support
depths is supported depending whether flush-mounting or recessed-mounting is chosen.
Cisco Catalyst 8300 Series Edge uCPE Hardware Installation Guide
22
Install the Cisco Catalyst 8300 Series Edge uCPE
Securing screws (customer provided)
23" Rack upright