- ページ 11

ネットワーク・ハードウェア Cisco Cisco MDS 9216A - Fabric SwitchのPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Cisco MDS 9216A - Fabric Switch 49 ページ。 Multilayer fabric switch
Cisco Cisco MDS 9216A - Fabric Switch にも： リリースノート (48 ページ), リリースノート (44 ページ), リリースノート (44 ページ), リリースノート (36 ページ), リリースノート (26 ページ), リリースノート (22 ページ), クイック・リファレンス・マニュアル (14 ページ), リリースノート (3 ページ), 仕様 (15 ページ)

ページを印刷する
Cisco Cisco MDS 9216A - Fabric Switch 設定マニュアル
well as helping to provide data security. An alternative is to use IPSec to secure the connection, although
there will be a performance impact.
Client, Host, or
iSCSI Initiator
has the 'iSCSI Initiator'
loaded on it to enable
Target Resource
Recognition & Attachment.
Storage Target Resources
(LUNs) appear as if they
are local drives attached
directly to the system.
C-Series IP Storage Services
Modules, 14/2 Multi-protocol
Services Module and MDS 9216i
1. Defines Client Access.
2. Defines Paths to Targets.
3. Converts Ethernet IP to FC Protocol
and Vice Versa.
4. Provides Target Addressing.
SAN Storage
has the LUNs (resources)
configured without ANY
special drivers, firmware,
Figure 1 Typical IP/FC network structure
C-Series IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module (14/2),
and MDS 9216i switch
The IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module (14/2), and the MDS
9216i switch provide IP hosts access to Fibre Channel storage devices. The IP host sends SCSI commands
encapsulated in iSCSI protocol data units (PDUs) to a C-Series IP port over a TCP/IP connection. At
this point, the SCSI commands are transferred from an IP network into a Fibre Channel network and
forwarded to the intended target.
Multi-protocol Services Module (14/2), and MDS 9216i switch network.
iSCSI
Initiator
or protocols.
Figure 2
iSCSI
Initiator
IP
IP
Network
Network
MDS Switch
Fibre Channel
Fabric
MDS Switch
FC
FC
HP Fibre Channel
Storage
illustrates an IP Storage Services Modules (IPS-4, IPS-8),
iSCSI
Initiator
C-Series iSCSI
11