- ページ 9

電話アクセサリー Digitone DCB PlusのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Digitone DCB Plus 16 ページ。 Automatically blocks and routes screened calls with caller id

ページを印刷する

Standby Mode = Code 32

In Standby, the TEL phone port will be connected directly to the telephone line and phones connected

there will ring. This feature allows you to leave the DCB Plus off whenever you like without disconnecting

the device and the red LED will blink slowly. To enable this Mode, press and hold the Program Button for

3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code"

displays enter 32, display shows function.

Select Mode = Code 33

In Select Mode, you can enter only the callers you want to ring through to your phones connected

to the TEL Port while all others can ring your voice mail service or a separate answer machine in parallel

with the DCB Plus. Note: You must enter numbers into the Invited or VIP Lists to receive calls.

This mode allows the LINE to ring for all callers with valid phone numbers and are subject to OPX Code

73 blocking. Also with After Hours Mode enabled, only VIP callers can ring through. Blocked callers

will be immediately answered and after eight seconds, get hung-up on. To enable this mode, press and

hold the Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the

prompt for "Enter Code" displays enter 33, display shows function.

After Hours Mode - Programmable Time Feature Introduction

During a certain time of the day or night you can set the DCB Plus to enter into After Hours Mode. This

mode is designed to keep phones connected to the TEL phone port from ringing and allow calls to be

answered by an optional answer machine when it is enabled on a daily basis. If you run a business, then

you would use this After Hours Mode so all callers can leave a message. If your work or dinner times are

different from regularly scheduled times, you would use this mode so that you can get your sleep or to

completely avoid disruptive callers. During After Hours Mode, VIP callers can ring through at any

time regardless of the After Hours time settings. Invited callers can only ring through normally when

After Hours Mode is not enabled.

To use the After Hours Mode, you must first understand military time presented here. The clock on the

DCB Plus display converts the telephone company's supplied clock data into either AM or PM time. If the

morning hours are 1:00am = 0100 hours, 2:00am = 0200 hours, etc. until noon = 1200 hours and then

the afternoon hours are 1:00pm = 1300 hours, 2:00pm = 1400 hours, etc. until midnight = 0000 hours.

So, to set a time for a business after hours beginning in the early evening until the next morning or

5:00pm to 8:00am you would use the military time of 1700 and 0800 as the two numbers for your After

Hours settings. To set a time for dinner in the evening from 6:00pm to 8:00pm you would use the times

of 1800 and 2000. To set a time for early morning until lunch time or 1:00am to 12:00pm you would use

0100 and 1200.

After Hours Mode Settings

Step 1) Monday thru Friday – Start & End Times

Using military time as shown above, set this feature on by enter programming: press and hold the

Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt

for "Enter Code" displays enter 82, then enter the Start time of day (Ex. 1700, 5:00pm from example

above), display shows function. Next, when the prompt for "Enter Code" displays enter 83, then enter

your End time of day (Ex. 0800, 8:00am from example above), display shows function.

Full Day After Hours Mode can be enabled when both Code 82 and Code 83 are the same number.

Ex. 0800, or 8:00am for Code 82 and 0800, or 8:00am for Code 83. This setting leaves the After Hours

Mode - On 24 hours a day. Use Code 88 in programming to enabled 24 hour After Hours Mode.

Step 2) Monday thru Friday - Enable

To enable Monday thru Friday, when the prompt for "Enter Code" displays, enter 84, display shows

function.

To disable Monday thru Friday, when the prompt for "Enter Code" displays enter 85, display

shows function.