- ページ 12

電話アクセサリー Digitone ProSeries 3のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Digitone ProSeries 3 16 ページ。

ページを印刷する

After Hours Mode Settings

Step 1) Monday thru Friday – Start

Code 82

& End Time

Code 83

Using military time as shown above, set this feature on by enter programming: press

and hold the Program Button for 3 seconds until you see "Program Mode", then "Pick

Up Phone", when the prompt for "Enter Code" displays enter 82, then enter the Start

time of day Ex. 1700, 5:00pm, display shows function. Next, when the prompt for

"Enter Code" displays enter 83, then enter your End time of day Ex. 0645, 6:45am,

display shows function.

Full Day After Hours Mode can be enabled when both Code 82 and Code 83 are the

same number. Ex. 0454, or 4:54am for Code 82 and 0454, or 4:54am for Code 83.

This setting leaves the After Hours Mode - On 24 hours a day.

Use

Code 88

programming to enable 24 hour After Hours Mode or Code 89 to disable 24 hour After

Hours Mode.

Step 2) Monday thru Friday – Enable

Code 84

Disable

Code 85

To enable Monday thru Friday, when the prompt for "Enter Code" displays, enter 84,

display shows function.

To disable Monday thru Friday, when the prompt for "Enter

Code" displays enter 85, display shows function.

Step 3) Saturday & Sunday – Enable

Code 86

Disable

Code 87

If you want the same time interval to work during Saturday and Sunday, when the

prompt for "Enter Code" displays, enter 86, display shows function.

To disable this

feature, when the prompt for "Enter Code" displays, enter 87, display shows function.

Step 4) After Hours Mode

Code 81

ON or

Code 80

OFF

To enable After Hours Mode, enter programming: when the prompt for "Enter Code"

displays, enter 81, display shows function. To turn this feature Off, when the prompt

for "Enter Code" displays enter 80, display shows function. Note: To enable After

Hours Mode you must first enter Start and End times (above) and day periods (M-S).

Display All Operating Codes

Code 92

Press and hold the Program Button for 3 seconds until you see "Program Mode", then

"Pick Up Phone", when the prompt for "Enter Code" displays, enter 92 to see the

current settings. The factory default list is Pg1: 16, 28, 30, 46, 48, 59, Pg2: 70,

73, 75, 77, 80, 85, Pg3: 87, L1, 96, 66, 95, 03. These codes can change when

the user enables alternate settings.

VoIP Time Option

Code 95

- Manually Set Clock and Date

The date and time are determined by your local phone service automatically, but you

can manually set it for use with VoIP phone services. Press and hold the Program

Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the

prompt for "Enter Code" displays, enter 95 followed by the year in two digits, the

month in two digits, the day in two digits and the (Military) time in 4 digits.

Example, 95 20 05 28 1425 * or 95 + Year 20 + Month 05 + Day 28 + Mil Time 1425

(2:25PM) + * key to store. The display will show the new Time and Date changed

immediately after you hang up and for each call thereafter. To return to factory setting

of Automatic Date & Time from your phone company, enter 95 # *.