- ページ 7

メディア・コンバーター ACU-RITE SENC 150のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ACU-RITE SENC 150 12 ページ。 Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
ACU-RITE SENC 150 にも：インストレーション・マニュアル (8 ページ), リファレンス・マニュアル (20 ページ), インストレーション・マニュアル (4 ページ), インストレーション・マニュアル (6 ページ)

SENC 150 Reading Head Replacement Instructions

Removing the reading head

Twist brackets 45° to remove.

Slide brackets away from

reading head and cable.

 Remove the alignment brackets.

 Gently slide the reading head out of the end of the scale case.

 Place the defective reading head in a safe location.

Cleaning the glass scale

 Saturate a clean cotton swab or lint-free cloth with alcohol.

 Clean the glass scale by wiping the surface and edge.

Wipe until no residue is found on the swab or cloth.

Do not scratch the inside of the scale.

 Lip seals may be removed for glass cleaning if desired.

Gently pull seals out through the end of the scale case.

 Reinsert the lip seals into the end of the scale case, and gently

pull them through the extrusion. Center the seals in the case.

 Run a plastic pin between the lip seals to reset them into position.

4 Removing the reading head