- ページ 20

ネットワーク・ハードウェア Cisco Firepower 4110のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Firepower 4110 26 ページ。 Rack-mount and ground the chassis
Cisco Firepower 4110 にも：メンテナンスとアップグレードマニュアル (20 ページ), マニュアル (36 ページ), マニュアル (8 ページ), マニュアル (42 ページ), はじめに (42 ページ)

Secure the Power Cord on the AC Power Supply Module

Warning

Step 1

Attach the clamp to the tie wrap by holding the clamp with the loop side on the bottom and sliding the tie wrap through

the box-shaped channel above the clamp (see the following figure).

One side of the tie wrap has evenly spaced ridges and the other is smooth. Be sure the ridged side is face up and that you

slide it through the open side of the channel. You will hear a click as the tie slides through—it moves in one direction

only. To remove the tie wrap from the clamp, push the lever on the closed side of the box-shaped channel and slide out

the tie wrap.

Figure 11: Tie Wrap Through the Box Channel of the Clamp

Tie wrap

Step 2

Attach the clamp to the power supply module:

Installation, Maintenance, and Upgrade

Statement 1089 Instructed and Skilled Person Definitions

An instructed person is someone who has been instructed and trained by a skilled person and takes the

necessary precautions when working with equipment.

A skilled person or qualified personnel is someone who has training or experience in the equipment

technology and understands potential hazards when working with equipment.

Statement 1090 Installation by Skilled Person

Only a skilled person should be allowed to install, replace, or service this equipment. See statement 1089

for the definition of a skilled person.

Statement 1091 Installation by an Instructed Person

Only an instructed person or skilled person should be allowed to install, replace, or service this equipment.

See statement 1089 for the definition of an instructed or skilled person.

Installation, Maintenance, and Upgrade

Box channel