- ページ 17

ネットワーク・ハードウェア Cisco Firepower 4125のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Firepower 4125 38 ページ。 Rack-mount the chassis
Cisco Firepower 4125 にも：マニュアル (8 ページ), はじめに (42 ページ)

ページを印刷する

Overview

Note

Make sure you have the correct firmware package and software version installed to support this network

module. For instructions on how to verify your firmware package version and to upgrade the firmware

if necessary, see the

4100/9300 FXOS Compatibility

Figure 11: FPR-NM-8X1G-F

Captive screw/handle

Ethernet X/1

Ports 1 and 2 are paired together to form a

hardware bypass pair. LED B1 applies to this

paired port.

Ethernet X/2

Ports 5 and 6 are paired together to form a

hardware bypass pair. LED B3 applies to this

paired port.

Network activity LEDs

Cisco Firepower 4100/9300 FXOS Firmware Upgrade

• Left LED—Green indicates network activity

when a 10M/100M/1G connection is made.

• Right LED—Not in use at this time.

for the software compatibility matrix.

Bypass LEDs B1 through B4

• Green—In standby mode.

• Amber, flashing—Port is in hardware bypass

mode, failure event.

Ethernet X/2

Ports 3 and 4 are paired together to form a

hardware bypass pair. LED B2 applies to this

paired port.

Ethernet X/2

Ports 7 and 8 are paired together to form a

hardware bypass pair. LED B4 applies to this

paired port.

—

1-Gb Network Module with Hardware Bypass

Guide. See

Cisco Firepower

Overview