- ページ 16

ネットワーク・ハードウェア Cisco Firepower 4150のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Firepower 4150 36 ページ。 Rack-mount and ground the chassis
Cisco Firepower 4150 にも：メンテナンスとアップグレードマニュアル (20 ページ), マニュアル (26 ページ), マニュアル (8 ページ), マニュアル (42 ページ), はじめに (42 ページ)

1-Gb SX/10-Gb SR/10-Gb LR Network Module with Hardware Bypass

Note

Make sure you have the correct firmware package and software version installed to support this network

module. For instructions on how to verify your firmware package version and to upgrade the firmware if

necessary, see the

FXOS Compatibility

Figure 12: FPR4K-NM-6X1SX-F, FPR4K-NM-6X10SR-F, FPR4K-NM-6X10LR-F

Captive screw/handle

Bypass LEDs B1 through B3:

• Green—In standby mode.

• Amber, flashing—Port is in hardware bypass

• Amber—Port is in hardware bypass mode,

Ethernet X/3 (top port)

Ethernet X/4 (bottom port)

Ports 3 and 4 are paired together to form a

hardware bypass pair.

The 1-Gb SX /10-Gb SR/10-Gb LR network modules have the following insertion loss measurements. Insertion

loss measurements help you to troubleshoot the network by verifying cable installation and performance.

Overview

Cisco Firepower 4100/9300 FXOS Firmware Upgrade

for the software compatibility matrix.

mode, failure event.

forced.

Guide. See

Cisco Firepower 4100/9300

Six network activity LEDs

• Amber—No connection, or port is not in use,

or no link or network failure.

• Green—Link up, no network activity.

• Green, flashing—Network activity.

Ethernet X/1 (top port)

Ethernet X/2 (bottom port)

Ports 1 and 2 are paired together to form a

hardware bypass pair.

Ethernet X/5 (top port)

Ethernet X/6 (bottom port)

Ports 5 and 6 are paired together to form a

hardware bypass pair.

Overview