- ページ 6

メディア・コンバーター Digitrax DH163A0のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Digitrax DH163A0 8 ページ。 Mobile decoder circuit board replacement 1.5 amp/2 amp peak 6 fx3 functions, 0.5 amp

ページを印刷する

Function Outputs on the DH163A0

The DH163A0 is set up at the factory to control six function outputs. The

DH163A0 is configured to control the forward and reverse lights on the loco-

motive through the yellow lead and white lead using Function 0 (F0F-forward

and F0R-reverse) for directional lighting. These functions are part of the con-

nections made when the decoder is installed.

Functions F1 (Green), F2 (Violet), F3 (Brown) and F4 (White/Yellow) can be

used by soldering a wire from the pad for the function you wish to use to the

lamp (or other function) you wish to control. The wire colors indicated are the

standard color code used in the industry (you can use any color you like).

These colors are important if you plan to use function remapping.

CAUTION: When adding function wires, be very careful that the wires you add

do not come into contact with any other pads or components on the board

where they might create a short circuit.

All six function outputs can be easily set up with Digitrax FX

or as standard on/off functions with the following operational qualifiers:

1. Forward or Reverse direction of travel, or

2. Whether F0 is on or off, or

3. Both direction of travel and whether F0 is on or off, or

4. Whether the locomotive is stopped or moving.

Figure 4. DH163A0 Decoder Function Outputs (front of loco to the right)

Left side

(Fireman's)

Pickup

Blue

F0R

Right Side

(Engineer's)

Pickup

D D

C C

igitrax

Run Your Trains, Not Your Track!

motor connections

F2, Violet

F4, White/yellow

C C

ommand

ontrol

F3, Brown

F1, Green

Blue/+common

www.digitrax.com

lighting effects

Left side

(Fireman's)

Pickup

F0F

Blue

Right Side

(Engineer's)

Pickup