- ページ 2
スピーカー argon audio Tempo ActiveのPDF クイックスタートをオンラインで閲覧またはダウンロードできます。argon audio Tempo Active 2 ページ。
ページを印刷するQuick start
Start up
1.
Connect the Tempo Active Speaker with the Tempo Passive
Speaker, using normal speaker cable. (remember to connect
+ to + and – to - )
2.
Connect the Power cord into an electric outlet and into the
back of the Tempo Active Speaker. The LED light on the
loudspeaker will light ORANGE.
3.
Your speaker is automatically ready for Pair and Connect with
Bluetooth (BT), if you intend to use this function - Activate BT
on your playback device (mobile phone etc) and Scan for
Devices. Your speaker will show up as "Tempo A4". Press
"pair" and you are connected. The LED light on the speaker
will change to solid BLUE. Start playback from you playback
device (mobile phone etc) there will be both a solid BLUE and
a LIGHT BLUE LED, indicating BT playback.
a.
Notice; when you restart playback from BT, it will
take 5-8 sec. before sound will be heard from the
speaker.
4.
Besides Bluetooth, Argon Tempo have three more inputs:
Optical1, Optical2, and AUX.
Use the included remote control to select your wished input.
5.
If you have an Active Subwoofer, connect it to the Tempo
Speaker SUB OUTPUT, using a RCA cable and then connect
the cable to Your Subwoofer.
6.
Included in the box are two sponges. These two sponges are
used to adjust the bass response. Mounted in the bass ports
on the back of the speakers they will lower the bass
response. Feel free to try what suits you best, sound wise. It
will all depend on your placement of the speakers and your
taste.
Basic Operating
1.
2.
Tips
w w w . a r g o n a u d i o . c o m
T e m p o A c t i v e Q u i c k s t a r t
You can adjust the Master volume on the back of the Tempo
speaker.
a.
It's recommended to set the Master volume at a
rather high level.
b.
Then control the daily volume level using Your
Source player (Tablet, Laptop, Phone etc). or the
included remote.
c.
Besides input select on the remote control you can
also change inputs by pressing the volume button
on the back side of the active Tempo speaker
Remote function from Samsung, Sony and Denon remotes.
a.
Argon Tempo support most (but not all) Samsung
TV, Sony TV and Denon Receiver remote functions
for "Volume +/-"and "Mute".
If you use the Argon Tempo with a Samsung TV,
Sony TV or Denon Receiver it allows you to have
only one remote control (the TV remote) to control
basic and useful functions.
•
We recommend a running-in time of your Tempo
Speakers of approximately 15-20 hours at normal
listening level before you decide on the final positioning
of the Speakers. During the running-in time the drive
units will settle in and perform as intended.
•
For optimal sound performance, the best listening
position is on ear level with the speakers placed not too
far from a wall.