- ページ 6
コントローラー Digitrax SoundFX SDXH186MTのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Digitrax SoundFX SDXH186MT 16 ページ。 Complete train control
ページを印刷する
Speed Tables-How the Loco Responds to the Throttle
With Digitrax LocoMotion, there are two types of speed tables: 3 Step Ta-
bles and High Resolution 28 Step Tables. Please see your Decoder Man-
ual for a discussion of the 28 Step Tables. The 3 Step Tables are set up
by programming 3 CVs: Start Voltage (CV02), Mid point Voltage (CV06)
and Max Voltage (CV05). These values are set at 000 at the factory. All
have a range of values from 000 to 255. We recommend the following CV
values as a starting point for experimenting with speed tables.
Loco Type
Switcher
Concentrated low speed. Limited top
speed
Road Switcher
Prototypical top speed w/evenly
distributed curve from 0 to top speed
Mainline Loco
Quick increase to cruising speed then
levels off to prototypical top speed.
Decoder Reset CV08
Decoder reset lets you reset all CV values to the initial factory settings. To
reset all CV values, program CV08 to a value of 008. You also have the
option of resetting all values except the 28 speed step tables. To do this,
program CV08 to a value of 009.
Other LocoMotion
Direction of Travel & Scalable Speed Stabilization
(Back EMF) Features
Switching speed is controlled by CV54. The factory setting is 000 for
OFF. To turn on the switching speed feature, program CV54 to a value of
001. When this feature is on, use F6 to activate and deactivate switching
speed. With the feature on the throttle's target speed is effectively re-
duced by about 50% and the effects of accel and decel programmed into
the decoder are reduced by 1/4. This is useful for yard switching opera-
tions.
Normal Direction of Travel is controlled by CV29. See your decoder
manual or the Digitrax Toolbox App for additional information on the
settings for CV29.
© 2017 Digitrax, Inc.
Features: Switching Speed, Normal
®
— 6 —
V Start
V Mid
CV02
CV06
002
038
002
048
002
128
www.digitrax.com
V Max
CV05
064
098
154