- ページ 4

ターンテーブル argon audio TTのPDF マニュアルをオンラインで閲覧またはダウンロードできます。argon audio TT 9 ページ。
argon audio TT にも：クイックスタート (2 ページ)

T T M a n u a l

Cartridge Downforce Adjustment

The Counterweight supplied is suitable for cartridges weighing between 3.0-6.0g.

- Gently push and turn the Counterweight onto the rear of the tonearm (with the scale facing

toward the front of the turntable).

- Remove the cartridge protection cap.

- Lower the tonearm lift and position the cartridge in the space between tonearm rest and

platter.

- Carefully rotate the Counterweight until the tonearm balances out. The tonearm should

return to the balanced position if it is moved up or down. This adjustment must be done

carefully.

- Once the tonearm is correctly balanced return it to its rest. Hold the Counterweight without

moving it, and gently rotate the Down force Scale ring until the zero is in line with black line

on the rear of the tonearm. Check whether the arm still balances out.

- Rotate the counterweight counter clockwise (seen from the front) to adjust the down force

according to the cartridge manufacturer's recommendations. One mark on the scale

represents 0.05g of down force.

NOTE: The recommended down force for the factory fitted cartridge is 3.5±0.5g.

This turntable uses a moving magnetic cartridge and has a RIAA amplifier built in. If you are

using a separate phono input or phono amplifier, set the RIAA ON/OFF Switch to OFF mode.

The power adaptor is in the foam packing material. Unpack the power adaptor and plug the

small end into the DC power jack located at the back side of the turntable. Plug the power