- ページ 5

ターンテーブル argon audio TT - 3のPDF マニュアルをオンラインで閲覧またはダウンロードできます。argon audio TT - 3 8 ページ。

T T - 3 M a n u a l

Cartridge downforce adjustment

1. Gently push and turn the Counterweight onto the rear of the

tonearm (with the scale facing toward the front of the turntable).

2. Remove the cartridge protection cap.

3. Lower the tonearm lift and position the cartridge in the space

between tonearm rest and platter.

4. Carefully rotate the Counterweight until the tonearm balances

out. The tonearm should return to the balanced position if it is

moved up or down. This adjustment must be done carefully.

5. Once the tonearm is correctly balanced return it to its rest. Hold

the Counterweight without moving it, and gently rotate the Down

force Scale ring (the part with numbers on it) to 0. Check whether

the arm still balances out.

6. Rotate the counterweight counter clockwise (seen from the front)

to adjust the down force according to the cartridge manufacturer's

recommendations.

NOTE: The recommended downforce for the factory fitted cartridge

is 1.75g.

Turn the Anti-skating Control to the same value as the adjusted

downforce. The recommended downforce for the factory fitted

cartridge is 1.75g

An external switching power adaptor (DC12V 0.5A) is supplied with

this turntable. Connect the turntable to a mains voltage of

110V/60Hz or 230V/50Hz.