舶用機器 Argonaut M7のPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。Argonaut M7 2 ページ。 Smart touch monitor
ページを印刷する41665 Date Street ● Murrieta ● California, 92562 ●Tel 951.813.3600 ● Fax 888.550.6578 ● [email protected]
Welcome
Thank you for your recent purchase of the Argonaut M7 monitor. You represent a wise and rapidly growing group of boaters that recognize the smartest way to equip
your boat for now and the future! We use smartphones in all facets of our lives and Argonaut is proud to be the first company in history to offer you practical control
of your personal device in the marine environment. As marine apps become increasingly more powerful, your M7 will prove to be one of your most indispensible
boating tools!
Package Contents
The following items are included within your M7 packaging:
1.)
M7 Monitor.
2.)
Bezel Back Cover Frame With Mounting Screws.
3.)
Flush Mount Oversize Bezel Back Cover Frame.
4.)
Flush Mount Frame Edge Face Cover.
5.)
RAM Mount Arm Kit With Mounting Screws.
6.)
Miracast HDMI Screen Mirroring Dongle.
7.)
12 Volt DC-DC Converter For Miracast.
8.)
Micro Female To Standard Female USB Adapter.
9.)
HDMI Female To Female Coupler.
10.) 6' Female BNC Composite Video Cable.
11.) Velcro Strap (To Attach BNC To RAM Base).
Mounting
The M7 can be conveniently flush or pedestal mounted. Flush Mounting: Refer to the attached mounting template and instructions. RAM Mounting: Attach the
diamond shaped mounting ball plate to the back of the M7 using screws with lock washers. Take care to tighten just snug, not over tighten. Attach the circular
mounting ball plate to your desired location. Attach the adjustable arm to the circular and diamond shaped mounting plates. Adjust the display angle as desired.
Note: As an added precaution to avoid accidental detachment, secure the adjustable clamp with cable wrap or bungee cord.
Wiring
Power: The M7 monitor is designed for 12 Volt power input. NOTE: DO NOT CONNECT DIRECTLY TO A 24 VOLT POWER SOURCE AS THIS WILL DAMAGE
THE DISPLAY AND VOID YOUR WARRANTY. If you need to connect directly to a 24 volt system, please consult with your dealer or Argonaut and we can supply
you with an optional 24 volt DC-DC converter. PLEASE MAKE SURE TO AVOID IMPROPER CROSSING WIRES (POSITIVE TO NEGATIVE) AS THIS CAN
DAMAGE THE DISPLAY ELECTRONICS.
HDMI: Place the HDMI cable end in a dry location. We recommend this location to be ventilated to avoid overheating the Miracast dongle or your phone during hot
operational conditions. Attach the Actiontec Miracast dongle to the HDMI cable using the supplied HDMI coupler. Connect the Miracast DC-DC converter to 12 volt
power. Note that this part is provided to supply power for the Miracast dongle not your phone. If desired, you can also power the Miracast with a standard 5 volt
micro USB charger.
HDMI/Miracast Parts Disconnected
Actiontec Miracast Setup: The Miracast provides a live streaming image directly from your phone to the M7. We recommend placement of this part next to your
phone for best performance. Please follow the Miracast setup instructions.
Micro USB: This connector should also be placed in close proximity to the Miracast as described above. Please note that the specially designed USB cable not only
communicates with your M7 but also provides phone charging via the M7's built in phone charging circuitry.
BNC VIDEO: This connector allows direct connection to a camera or video source if desired. Note that a velcro retaining strap is provided to secure this short
connector to the RAM mount bolt hole if desired.
Argonaut M7 Smart Touch Install/Operation Guide
HDMI/Miracast Parts Connected