- ページ 31

ネットワーク・ハードウェア Cisco SCE 1000 andのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco SCE 1000 and 49 ページ。 Service control engine 1000 2xgbe

Example 2:

Following is a sample topology configuration for a non-redundant bump-in-the-wire (inline) topology. All values are the system

default values, so it is not necessary to type in the response. Simply press enter at each line.

• Connection mode — Inline

• For a non-redundant topology, link bypass on-failure should be Bypass, so that traffic continues to flow through the link.

• After operation of the system resumes, and the SCE 1000 reboots, the SCE 1000 will resume operation. (Admin status after

abnormal reboot is Operational.)

Would you like to enter the Topology configuration menu? [no]: y

Enter Connection mode:

1- inline

2- receive-only

Enter your choice [1]:

Enter On-failure behavior:

1- Bypass

2- Cutoff

Enter your choice [1]:

Enter admin status of the SCe after abnormal boot:

1- Operational

2- Not-Operational

Enter your choice [1]:

Data collection for the system configuration is completed.

Example 3:

Following is a sample topology configuration for a redundant inline topology.

• Connection mode — Inline

• For a redundant topology, link bypass on-failure should be Cutoff, so that operation switches to the backup link.

• After operation of the system resumes, and the SCE 1000 reboots, the SCE 1000 will resume operation. (Admin status after

abnormal reboot is Operational.)

Would you like to enter the Topology configuration menu? [no]: y

Enter Connection mode:

1- inline

2- receive-only

Enter your choice [1]: 2

Enter On-failure behavior:

1- Bypass

2- Cutoff

Enter your choice [1]:2

Enter admin status of the SCE after abnormal boot:

1- Operational

2- Not-Operational

Enter your choice [1]:

Data collection for the system configuration is completed.

Step 10: Completing and Saving the Configuration

When you have completed the entire configuration, the system checks for errors. If errors are found, a warning message appears.

When the configuration is error-free, you may apply and save it.