- ページ 39

ネットワーク・ハードウェア Cisco SCE 1000 andのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco SCE 1000 and 49 ページ。 Service control engine 1000 2xgbe

Viewing the User Log Counters

View the user log for errors that occurred during the installation process.

To display the user log device counters, complete the following steps:

At the SCE 1000# prompt, type

Step 1

Example:

The following example shows the current User-File-Log device counters.

SCE 1000number show logger device user-file-log counters Logger device User-File-Log counters:

Total info messages: 1

Total warning messages: 0

Total error messages: 0

Total fatal messages: 0

If there are "Total error messages" or "Total fatal messages", use the show logger device User-File-Log command to display

details about the errors.

When you enter configuration commands, it immediately effects the SCE platform operation and configuration. This

configuration, referred to as the

platform is up. After reboot, the SCE platform loads the

by the user, into the

running-config

The SCE platform provides commands for:

• Viewing the running configuration

• Viewing the startup configuration

After configuring the SCE platform, you may query for the running configuration using the command show running-config. This

command displays the non-default running configuration. To view all SCE platform running configuration, whether it is the

default or not, you may use the option all-data in the show running-config command.

show logger device User-File-Log counters

, is saved in the SCE platform volatile memory and is effective while the SCE

running-config

startup-config

and press Enter.

, which includes the non-default configuration as saved