- ページ 30
スキャナー Epson 00000650 - Perfection 3200 PRO Color ScannerのPDF ソフトウェアマニュアルをオンラインで閲覧またはダウンロードできます。Epson 00000650 - Perfection 3200 PRO Color Scanner 34 ページ。 Epson scan icm updater v1.20 (psb.2008.07.001)
Epson 00000650 - Perfection 3200 PRO Color Scanner にも： パンフレット＆スペック (4 ページ), スタートマニュアル (8 ページ), 製品サポート速報 (23 ページ), マニュアル (11 ページ), 最初にお読みください (2 ページ), 更新 (1 ページ)
ページを印刷する
The SilverFast Defaults screen appears:
4
Verify that the Gamma-Gradation value is
set to 2.20. (If you set it while building a
transparency profile, SilverFast remembers
the setting.) Then click the CMS tab.
The CMS Defaults screen appears:
5
If you've already configured SilverFast for
reflective scanning, the only change you
need to make is to enter the profile you
created for transparency scanning under
Scanner (Transparent).
26
Otherwise, make sure that the other settings
are as shown. If necessary, refer to
"Reflective Scanning with SilverFast" on
page 23.
6
When you've completed all the settings,
click OK.
7
On the main SilverFast screen, click the
Frame tab. Set the Scan Type to 48->24-bit
Color, as shown:
You're ready to scan!
8
Click the Prescan button.
Once the Prescan is done, you can set the crop
and resolution as needed, and use SilverFast's
powerful color-correction tools to make any
desired enhancements to your image. For
details on using SilverFast's image-correction
features, see the SilverFast manual.
Once you've configured SilverFast, you won't
need to change these options. SilverFast
automatically remembers the required
Gamma-Gradation settings for reflective and
transparency, and automatically uses the
correct profile for each.
In the next section, we'll show you how to print
your images, using the printer profiles you created
with MonacoEZcolor.