ページを印刷する
Assembly Instructions
Step 23
Joining units together
5mm
M
Fittings have been
N
supplied so you are able
to join units together.
Make sure that your first
unit is level.
Push the other unit up
against the first unit and
ensure both units are
level.
Check that the ends are
flush and in line, then
clamp them together.
Using a 5mm drill bit,
drill through the 2 holes
(shown circled) in the
side panel into the
adjoining side panel of
the other unit.
Push the connecting
sleeves
into the holes
N
N
and then screw the
connecting bolts
in
M
M
from the other side.
16