- ページ 11

室内装飾品 Argos 259/2468のPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Argos 259/2468 16 ページ。 3 door tall robe

ページを印刷する

Assembly Instructions

Step 14

Fit back panels

Square up the unit by

making sure that

measurement x:x equals

y:y.

Place the small back

and large back

coloured surface facing

down, onto the unit as

shown.

Make sure that the 2

backs are pushed up

tight against each other

and that they meet in the

centre of the divider's

back edge.

Nail

around the

outside edges of the 2

backs.

Note: Do not nail where

the 2 backs meet.

Push the nail screws

through the back

holders

and tap them

down between the small

back

and large back

and into the back

edge of the divider

Keep tapping the nail

screws

in until the

back holders

dig into

the small and large back.

Stand the unit up for

the next step.

The measurement from top corner X to bottom corner X must be

equal to the measurement from top corner Y to bottom corner Y

Note: If ever you need to take

the backs off to dismantle the

unit, the nail screws can be

taken out using a screwdriver.

Note: These can

also be round

Warning: The

unit is heavy.

Lift with care.