- ページ 10
ネットワーク・ハードウェア Cisco TelePresence MCU 4200 SeriesのPDF はじめにをオンラインで閲覧またはダウンロードできます。Cisco TelePresence MCU 4200 Series 18 ページ。 Accessing conferences
Cisco TelePresence MCU 4200 Series にも： スタートマニュアル (15 ページ)
ページを印刷する
Configuring the MCU
Step one: Log in to the MCU
All administration of the MCU is performed via the web interface.
To log in to the web interface of the MCU:
1
Use your browser to navigate to the IP address of the MCU (to discover the IP
address, refer to the previous section).
2
Click
Log in
information page
Cisco recommends that you change the admin account to use a password
i
as soon as possible. To do that, click
information
required user information.
Step two: Using an H.323 gatekeeper or SIP registrar (optional)
If you have H.323 endpoints, using an H.323 gatekeeper can make it easier for
participants to call in to a conference. You can configure the MCU to use an external
gatekeeper or its own built-in gatekeeper. For information about using the built-in
gatekeeper, refer to the online help.
If you have SIP endpoints, using a SIP registrar can make it easier for participants to
call in to a conference.
To configure the MCU to use an H.323 gatekeeper:
1
In the web interface of the MCU, go to
2
Enable
H.323 gatekeeper usage
the online help for further assistance.
3
Click
Apply changes
To configure the MCU to use a SIP registrar:
1
In the web interface, go to
2
Enable
SIP registrar usage
online help for further assistance.
and enter the user name
is displayed.
page or go to
.
Settings > SIP
and configure the settings you require, using the
with no password. The
admin
Change password
, click the
Users
admin
Settings > H.323
and configure the settings you require, using
.
Configuring the MCU
Login
on the
Login
link, and provide the
.
10