- ページ 8

ネットワーク・ハードウェア Cisco UBR7246VXRのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco UBR7246VXR 27 ページ。 Universal broadband router
Cisco UBR7246VXR にも：ユーザーマニュアル (7 ページ), インストレーション・マニュアル (28 ページ), ハードウェアのインストール (25 ページ)

Power cables, manuals, and other additional items are packaged in separate boxes. After you have unpacked the system, verify

that you have received all the required components and documentation.

Step 1

Using the packing list as a guide, verify that you have received everything that is listed, including the following:

a. System hardware documentation and software documentation (if ordered).

b. Optional equipment that you ordered, such as transceivers (GBICs), flash cards, cables, or special connectors.

Check that all equipment you ordered is installed in the chassis.

Step 2

Ensure that the system configuration matches the packing list.

Step 3

Attaching the Rack-Mount Brackets

Before installing the chassis in the rack, you must install rack-mount brackets on each side of the front, middle, or rear of the

chassis. If you are rack-mounting the chassis from the front, you cannot use the cable-management bracket. If you are

rack-mounting the chassis at the rear or middle of the chassis, both rack-mount brackets and the cable-management bracket

must be installed on the chassis before the chassis is installed in the rack.

Figure 3

Rack-Mount Bracket Options

Rack-mount

bracket

Rack-mount bracket

Installed in 4-post rack—rear installation

Installed in 4-post rack—flush front installation

Rack-mount

bracket

Rack-mount bracket

Installed in 4-post rack—protruding front installation

Installed in open or relay-type tack