- ページ 5

サーバー Cisco 2600 SeriesのPDF リリースノートをオンラインで閲覧またはダウンロードできます。Cisco 2600 Series 32 ページ。 Configuring adsl wic to support pppoe clients
Cisco 2600 Series にも：インストレーション・マニュアル (12 ページ), 構成 (15 ページ), アプリケーションノート (41 ページ), データシート (6 ページ), 付録 (15 ページ), インストレーション・マニュアル (22 ページ), 概要 (13 ページ), クイック・スタート・マニュアル (2 ページ), マニュアル (5 ページ)

ページを印刷する

Table 2

Interfaces Supported on Cisco 2600 Series Routers (continued)

Interface, Network Module, or Data Rate

Dial, ISDN, and Channelized

Serial Network Modules

E1/T1 Multiﬂex Voice/WAN

Interface Cards

Voice/Fax Interface Cards

WAN Interface Cards

Advanced Integration

Modules

The voice/fax and ATM-25 network modules require Cisco IOS Plus feature sets.

The 1- or 2-port 10/100 Ethernet LAN interface for the Cisco 2620 and Cisco 2621 routers is only available in Cisco IOS Release 12.0 2XC, 12.03T, and later

12.0T releases.

Requires the Cisco IOS Plus feature sets.

See E1/T1 multiflex voice/WAN interface cards in this table.

See E1/T1 multiflex voice/WAN interface cards in this table

See E1/T1 multiflex voice/WAN interface cards in this table.

Requires the NM-1V or NM-2V network module.

1- or 2-port channelized T1/ISDN PRI

1- or 2-port channelized T1/ISDN PRI with CSU

1- or 2-port channelized E1/ISDN PRI balanced

1- or 2-port channelized E1/ISDN PRI unbalanced

4-or 8-port ISDN BRI S/T interface

4- or 8-port ISDN BRI U (NT1) interface

8- or 16-port analog modems

1-port T1 multiﬂex trunk interface (VWIC-1MFT-T1)

1-port E1 multiﬂex trunk interface (VWIC-1MFT-E1)

2-port T1 multiﬂex trunk interface (VWIC-2MFT-T1)

2-port E1 multiﬂex trunk interface (VWIC-2MFT-E1)

2-port T1 multiﬂex trunk interface with drop and insert

(VWIC-2MFT-T1-DI)

2-port E1 multiﬂex trunk interface with drop and insert

(VWIC-2MFT-E1-DI)

1- or 2-port voice interface card slots

2-port FXS voice/fax interface card

2-port E&M voice/fax interface card

2-port FXO voice/fax interface card

1-port ISDN BRI S/T interface (requires external NT1)

1-port ISDN BRI (NT1) U

1-port 56/64-kbps DSU/CSU

1-port T1/Fractional T1 with DSU/CSU

1-port high-speed serial (up to 2.048 Mbps)

2-port dual high-speed serial (up to 2.048 Mbps; asynchronous/

synchronous support)

2-port asynchronous/synchronous (up to 128 kbps)

Data compression AIM (up to 8.192 Mbps)

Release Notes for Cisco IOS Release 12.0(7)XK1 Feature Packs for Cisco 2600 Series Routers

Routers and Interfaces Supported

Routers Supported

All Cisco 2600 series routers

All Cisco 2600 series routers with

voice/fax network modules

All Cisco 2600 series routers with

voice/fax network modules

All Cisco 2600 series routers

voice/fax network modules

All Cisco 2600 series routers