- ページ 4

サーバー Cisco 2600 SeriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 2600 Series 22 ページ。 Configuring adsl wic to support pppoe clients
Cisco 2600 Series にも：インストレーション・マニュアル (12 ページ), リリースノート (32 ページ), 構成 (15 ページ), アプリケーションノート (41 ページ), データシート (6 ページ), 付録 (15 ページ), 概要 (13 ページ), クイック・スタート・マニュアル (2 ページ), マニュアル (5 ページ)

Setting Up the Chassis

Figure 3-3

Place the router right-side up on a flat, smooth, secure surface.

Step 4

Do not place anything on top of the router that weighs more than 10 lb (4.5 kg). Excessive weight on

Caution

top could damage the chassis.

Mounting the Chassis in a Rack

This section describes the procedures for rack-mounting the chassis. Cisco 2600 series routers with a

chassis height of 1 rack-unit (1RU) ship with brackets for use with a 19-inch rack or, if specified in your

order, optional larger brackets for use with a 23- or 24-inch rack. Cisco 2600 series routers with a chassis

height of 2 rack-units (2RU) ship with brackets for use with a 19-inch rack. The brackets are shown in

Figure 3-4

Warning

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special

precautions to ensure that the system remains stable. To see translations of the warnings that

appear in this publication, refer to the Regulatory Compliance and Safety Information document

that accompanied this device. The following guidelines are provided to ensure your safety:

•

Cisco 2600 Series Routers Hardware Installation Guide

3-4

Rubber Feet Location on Cisco 2691 Router

Chassis bottom

and

Figure

3-5.

If the rack contains only one unit, mount the unit at the bottom of the rack.

If the rack is partially filled, load the rack from the bottom to the top, with the heaviest component

at the bottom of the rack.

Chapter 3

Installing the Router

OL-2171-02