- ページ 27

サーバー Cisco 5100のPDF ハードウェア・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 5100 32 ページ。 Enterprise network compute system
Cisco 5100 にも：インストールの準備 (6 ページ)

Installing and Upgrading Field Replaceable Units

•

Warning

Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement

1030

These are the steps to remove the chassis cover:

Step 1

Confirm that the chassis is turned off and disconnected from the power supply or power supplies.

Step 2

Place the chassis on a flat surface.

Step 3

Remove the screws at top of the chassis cover.

Step 4

Remove the screws at the sides of the device as shown in the following figure.

Figure 10: Removing the Chassis Cover

Step 5

Lift the chassis cover after you have removed all the screws.

Removing and Replacing the Chassis Cover, on page 21

Installing a DIMM, on page 22

Removing a DIMM, on page 24

Upgrading the M.2 Storage Module, on page 25

Cisco 5100 Enterprise Network Compute System Hardware Installation Guide

C H A P T E R