- ページ 2

サーバー Cisco 700 seriesのPDF 概要をオンラインで閲覧またはダウンロードできます。Cisco 700 series 19 ページ。 Using profiles
Cisco 700 series にも：クイック・スタート・マニュアル (8 ページ), スタートマニュアル (27 ページ), ユーザーマニュアル (9 ページ), 管理マニュアル (36 ページ)

Product Features

This section describes the major features of Cisco 700 series routers.

Cisco 700 series routers include dial-on-demand routing (DDR). This allows the router to

dynamically initiate calls to remote devices across ISDN BRI lines as trafﬁc demands. The

router also terminates ISDN connections based on the level of the trafﬁc demanded on the

ISDN line and the dynamic routing parameters.

The automatic service proﬁle identiﬁer (SPID) and switch detection feature simpliﬁes the

use of ISDN terminal equipment and makes the equipment easier to use with fewer

parameters to enter. With this feature, the user only has to enter the local directory numbers

with area code. No SPID number or switch type is required from the user. The command

used is the set autodetection command.

The automatic detection feature only applies to ISDN switches for the USA and Canada,

usually an AT&T 5ESS Custom, DMS-100, NI-1, or NI-2 switch. The automatic detection

mechanism might not work with any other switch, such as a Siemens switch. The automatic

detection feature is only implemented in the U. S. image.

Cisco 700 series routers support the use of a Trivial File Transfer Protocol (TFTP) client.

This feature increases TFTP ﬁle transfer efﬁciency and reliability. The swl tftp command

loads the TFTP client software from the console port.

1-2 Cisco 700 Series Router Installation Guide