- ページ 3

サーバー Cisco 7513 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 7513 Series 44 ページ。 Chassis replacement
Cisco 7513 Series にも： 交換取扱説明書 (26 ページ), データシート (11 ページ), マニュアル (30 ページ), 維持 (20 ページ), 交換取扱説明書 (19 ページ), 交換取扱説明書 (22 ページ)

ページを印刷する
Cisco 7513 Series クイック・スタート・マニュアル

Install the Hardware

The Cisco 7513 has 13 slots: interface processor
slots 0 through 5, Route Switch Processor slots 6 and
7, and interface processor slots 8 through 12.
The Cisco 7576 router is two Cisco 7500 series
routers configured on a single split backplane, with
13 slots. Router A uses interface processor slots 0
through 5 with a Route Switch Processor in slot 6.
Router B uses interface processor slots 8 through 12
with a Route Switch Processor in slot 7.
The Cisco 7513 and Cisco 7576 routers have bays
for up to two AC-input or DC-input power supplies.
Each chassis will operate with one power supply, but
a second power supply allows load sharing and
increased system availability.
Note
The Cisco 7576 does not support the high
system availability (HSA) feature. The RSP in slot 6
is automatically the system master for router A and
the RSP in slot 7 is automatically the system master
for router B.
Blower module
Cable-management
bracket
Card cage and
processor
modules
Interface
processor slot
numbering
scheme
Air intake vent
AC
FAN
OK
OUTPUT
Power supplies
OK
FAIL
POWER
A
Chassis
grounding
receptacles
AC
FAN
OUTPUT
OK
OK
FAIL
POWER
B
Note
If you are only configuring one of the two
Cisco 7576 internal routers, configure router A
instead of router B. Install an RSP in slot 6, and
interface processors in slots 0 through 5.

Packing List

•
1 Cisco 7513 or 7576 router
•
1 Route Switch Processor (RSP)
•
Y-adapter cables, 1 auxiliary and 1 console
•
1 AC power supply
•
1 AC power supply cable
•
1 Power cord
•
1 Anti-static wrist strap and documentation
1