- ページ 6

サーバー Cisco 7513 SeriesのPDF 維持をオンラインで閲覧またはダウンロードできます。Cisco 7513 Series 20 ページ。 Chassis replacement
Cisco 7513 Series にも：クイック・スタート・マニュアル (44 ページ), 交換取扱説明書 (26 ページ), データシート (11 ページ), マニュアル (30 ページ), 交換取扱説明書 (19 ページ), 交換取扱説明書 (22 ページ)

Maintenance Procedures for the Cisco 7513, Cisco 7513-MX, and Cisco 7576

Figure 7-4

Captive screw

Card cage

side flange

Captive screw

Air intake grill

Caution

Unless the chassis is mounted in a rack, or otherwise anchored, the chassis might move toward you when

you pull the card cage and backplane assembly in the following step. To prevent injury, have a second

person hold the chassis in place while you pull the card cage and backplane assembly from the chassis.

With the captive screws loosened, carefully grasp the intake grill with both hands and pull the card cage

Step 4

assembly straight out of the chassis until there is enough clearance at the card cage side flanges to pull

the entire assembly clear of the chassis sides, as shown in

backplane and might be awkward to handle.

Step 5

When the card cage and backplane assembly is completely free of the chassis, carefully place it on an

antistatic mat or foam.

The electronic components on the rear of the backplane are completely exposed when the card cage and

Caution

backplane assembly is removed from the chassis. To prevent damaging these components, place the card

cage and backplane assembly on an antistatic mat or foam, and place the assembly in the same

orientation as when it is mounted in the chassis.

Cisco 7500 Series Installation and Configuration Guide

7-6

Chapter 7

Removing the Cisco 7513, Cisco 7513-MX, and Cisco 7576 Card Cage Assembly

POW ER

Maintaining Your Cisco 7513, Cisco 7513-MX, and Cisco 7576 Router

Captive screw

Card cage

side flange

Captive screw

POW ER

Figure

7-4. The assembly is heavier at the

OL-5008-03 B0