- ページ 11

サーバー Cisco AS5300 - Universal Access ServerのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco AS5300 - Universal Access Server 25 ページ。 Access server
Cisco AS5300 - Universal Access Server にも：付録 (10 ページ), 設定マニュアル (46 ページ), マニュアル (21 ページ)

ページを印刷する

Cisco AS5300 - Universal Access Server クイック・スタート・マニュアル

Connect a Console for Local Administrative Access

To configure the Cisco AS5300 from a locally-connected PC or terminal, you will need an RJ-45-to-RJ-45 rollover cable and a

terminal adapter (RJ-45-to-DB-9 or RJ-45-to-DB-25). The cable and adapter are included.

Step 1

Connect one of the adapters, labeled TERMINAL, to the communications port (usually labeled COM) on your PC or

terminal. (This communications port is also known as a console port.)

Connect one end of the RJ-45-to-RJ-45 rollover cable to the adapter.

Step 2

Connect the other end of the RJ-45-to-RJ-45 rollover cable to the port labeled CONSOLE on the rear panel of the

Step 3

Cisco AS5300.

Configure your PC terminal emulation software or terminal for 9600 baud, 8 data bits, no parity, and 1 stop bit.

Step 4

Universal access

server

RJ-45-to-RJ-45

rollover cable

Console port

(RJ-45)

(labeled CONSOLE)

PC (laptop)

RJ-45-to-DB-9 or

RJ-45-to-DB-25 adapter

(labeled TERMINAL)