- ページ 5

スキャナー Epson ActionLaser 1500のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Epson ActionLaser 1500 7 ページ。 Imaging cartridge replacement procedure
Epson ActionLaser 1500 にも：紙と紙の配達 (11 ページ), セットアップマニュアル (18 ページ), 製品サポート速報 (8 ページ), 製品仕様 (1 ページ)

ページを印刷する

Selecting PostScript

You need to change the emulation or mode setting through

SelecType before you can use PostScript.

The SelecType instructions below enable you to assign

PostScript quickly. If you need more detailed instructions on

using SelecType, see your printer manual

Note:

Be sure to install the interface and PostScript cards first. Otherwise,

the PostScript emulation or mode aloes not appear as a SelecType

option on the printer display.

For the ActionLaser 1000 and 1500

1. Press the ON LINE button to take the printer off line.

2. Press the SelecType Level 2 button.

3. Press V until EMULATION appears on the display.

Press b.

5. Press V until CH O appears.

Press b.

7. Press V until PS appears.

8. Press F to set the PS emulation.

9. Press the EXIT button twice to return to the READY message.

Note:

The READY message may not show O PS (indicating the

optional interface and PostScript) until after yourfirst print job

is sent from your computer to the printer each time you turn on

your printer.

10. Make sure that AppleTalk is active in the Chooser under the

Apple menu on your Macintosh.