- ページ 3

スキャナー Epson ActionLaser 1600のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Epson ActionLaser 1600 10 ページ。 Epson actionlaser 1600: quick start
Epson ActionLaser 1600 にも：最初に読むマニュアル (26 ページ), 製品仕様 (2 ページ)

ページを印刷する

Installing the Lower Paper Cassette Unit

Turn off the printer. Remove any interface cables and

unplug the printer's power cord from the electrical outlet

and from the printer.

Move the printer to one side. Then set the lower cassette

unit where your printer normally rests, keeping the paper

cassette facing you.

Note:

When lowering theprinter, be sure the interface cable is not

pinched between theprinter and the lower paper cassette unit.

Lift the printer and align it over the cassette unit using the

two alignment pins on the lower cassette unit as guides.

Lower the printer so that the pins tit securely into the

holes on the bottom of the printer as shown below.

Note:

Theprinter is heavy, so you may need to have someone help you

lift it.

Reconnect the power cord and the interface cable or cables

you removed and plug the power cord into an electrical

outlet.

Turn on the printer.

Laser Printers

Installing the Face-up Output Tray

1. Hold the output tray tilted at a slight angle away from you.

Then insert it into the back of the printer by placing the

pins on the bottom side corners of the tray into the holes

on each side of the paper ejection slot one at a time as

shown below.

2. Set the paper path selector on the top left of the printer to

the face-up position as shown below.

When you want printed pages to feed face down on top of

the printer, reset the paper path selector to the face-down

position.

Adding Memory

If you are having difficulty printing complex, graphics-

intensive pages or if you regularly use downloaded fonts,

you may want to install additional memory. Your printer's

controller board comes with 2MB RAM installed. To add

memory, you need to install one or two SIMMs on the

controller board. You can thus increase the printer's memory

until it totals 64MB, including the resident memory.

You can purchase SIMMs from various vendors. Be sure the

SIMMs you purchase meet the following requirements:

(1.4 inches), with a diameter of 10 mm (0.4 inches)

5/10/94

EPSON ActionLaser 1600

AL1600-3