ページを印刷するInstallation Warnings and Guidelines
Warning
The plug-socket combination must be accessible at all times, because it serves as the main disconnecting
device.
Statement 1019
Warning
This product relies on the building s installation for short-circuit (overcurrent) protection. Ensure that
the protective device is rated not greater than: 250 V, 15 A.
Statement 1005
Warning
Installation of the equipment must comply with local and national electrical codes.
Statement 1074
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be accessed
only through the use of a special tool, lock, and key, or other means of security.
Statement 1017
Warning
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority
or an electrician if you are uncertain that suitable grounding is available.
Statement 1024
Warning
For Nordic countries (Norway, Finland, Sweden and Denmark) this system must be installed in a
Restricted Access Location, where the voltage of the main ground connection of all equipment is the
same (equipotential earth) and the system is connected to a grounded electrical outlet.
Statement 328
Warning
High leakage current – earth connection essential before connection to system power supply.
Statement 342
Installing the Server
2
Installing the Server