ページを印刷するQUICK CONNECTIONS:
1. Plug in all tubes. (4 Pieces of 6BM8 / ECL82, prefer matched Quad or matched
Pairs)
2. Connect your source to RCA Jacks (Red/White RCA cables for signal inputs) on
the left rear side of the amplifier, and connect speaker wires (Red/Black Binding
Posts) in the back of the amplifier to your speakers.
3. Plug in power cord (Do this at last, in case the power switch is on)
4. Turn ON the power button in the back (rear right)
5. Select your source input via Selector knob (The knob on the left)
6. Turn to suitable volume Via Volume Knob (The knob on the right - And is a good
practice to dial volume to lowest before start and after finish)
7. Sit back, relax and enjoy!
8. If you are not sure, please ask your closest dealer, or email us directly! We are
professionals here to help and to instruct you the proper way in handling and
using tube amps the correct right, as well to point out the facts about tubes.
http://www.FinaleAudio.com | USER MANUAL
F-168 MK1
3