- ページ 24

スキャナー Epson DS-560のPDF ネットワーク・マニュアルをオンラインで閲覧またはダウンロードできます。Epson DS-560 33 ページ。 Epson connect technology
Epson DS-560 にも：レンジマニュアル (7 ページ), ここからスタート (2 ページ), セットアップマニュアル (4 ページ)

ページを印刷する

DS-560

Network Guide

Windows 7/Windows Vista/Windows XP:

Start > All Programs or Programs > EPSON > EPSON Scan > EPSON Scan Settings

Mac OS X:

Select Applications > EPSON Software > EPSON Scan Settings.

Click Test.

Checking the Wi-Fi module firmware version

Start EpsonNet Config.

Windows 8.1/Windows 8:

Start screen > Apps > EpsonNet > EpsonNet Config

Windows 7/Windows Vista/Windows XP:

Start > All Programs or Programs > EpsonNet > EpsonNet Config VX* > EpsonNet Config

Mac OS X:

Select Applications > Epson Software > EpsonNet > EpsonNet Config VX* > EpsonNet Config.

* Where "X" is the software version.

Select your scanner, and then click Configuration.

Select Network Interface - Information - Basic.

Click Software Information....

Checking the communication using the Ping command

You can use this feature to confirm whether communication is established between the computer and the product.

This method is only available if you have acquired the product's IP address in advance, such as in the following

situations.

❏ You have set a static IP address for the product and have taken a note of it.

❏ You took a note of the product's IP address when you setup the network, and it has not been changed by settings on

the access point or the product.

For more details about operating the computer, refer to

Ping command

In the TCP/IP network environment, confirm the IP addresses set on the computer and product, then check whether

communication is established between the computer and product.

Troubleshooting

"Ping command" on page

24.