- ページ 4
サーバー Cisco ONS 15600のPDF カード設定の変更をオンラインで閲覧またはダウンロードできます。Cisco ONS 15600 14 ページ。 Install the bay and backplane connections
Cisco ONS 15600 にも： リファレンス・マニュアル (29 ページ), マニュアル (10 ページ), リファレンス・マニュアル (22 ページ), 取付説明書 (14 ページ)
ページを印刷する
NTP-E150 Change the Optical Line Rate
Click OK. The row on the Pluggable Ports pane turns light blue until the actual SFP is installed and then
Step 9
the row turns white.
Stop. You have completed this procedure.
NTP-E150 Change the Optical Line Rate
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Click the Alarms tab:
Step 2
a.
b.
c.
In node view, double-click the ASAP card where you want to edit the PPM port rate.
Step 3
Click the Provisioning > Pluggable Port Modules tabs.
Step 4
Click the port with the port rate you want to change in the Pluggable Ports pane. The highlight changes
Step 5
to dark blue.
Click Edit. The Edit Port Rate dialog box appears.
Step 6
In the Change To field, use the drop-down menu to select the new port rate and click OK.
Step 7
Click Yes on the Confirm Port Rate Change dialog box.
Step 8
Stop. You have completed this procedure.
Cisco ONS 15600 Procedure Guide, R5.0
11-4
This procedure changes PPM port rates for the ASAP card. Perform this
procedure if you want to change the port rate on a multi-rate SFP that is
already provisioned.
None
NTP-E157 Provision a Multirate PPM, page 11-2
As needed
Onsite or remote
Provisioning or higher
"DLP-E26 Log into CTC" task on page 16-39
Verify that the alarm filter is not turned on. See the
page 17-50
as necessary.
Verify that no unexplained conditions appear on the network. If unexplained conditions appear,
resolve them before continuing. Refer to the Cisco ONS 15600 SONET Troubleshooting Guide.
Complete the
"DLP-E76 Export CTC Data" task on page 16-98
information.
Chapter 11
to log into an ONS 15600 on the network.
"DLP-E157 Disable Alarm Filtering" task on
to export alarm and condition
Change Card Settings
February 2008