- ページ 7

サーバー Cisco ONS 15600のPDF リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco ONS 15600 22 ページ。 Install the bay and backplane connections
Cisco ONS 15600 にも： カード設定の変更 (14 ページ), リファレンス・マニュアル (29 ページ), マニュアル (10 ページ), 取付説明書 (14 ページ)

ページを印刷する
Cisco ONS 15600 リファレンス・マニュアル
Chapter 1 Shelf and Backplane Hardware

1.5 Cable Routing

The narrow and wide cable routing modules (CRMs) can be installed on the sides of the bay to manage
and contain the optical cables as they are routed away from the bay. You can use both types of fiber
routing systems with overhead or under-floor cabling.

1.6 Customer Access Panel

The Customer Access Panel (CAP or CAP2) is located in the middle on the rear of the shelf. The CAP
and CAP2 provide an alarm pin field, timing, and LAN connections. The CAP or CAP2 plugs into the
backplane using 2mm Hard Metric connectors with 752 pins and is held in place with one large captive
bolt and multiple screws.
The CAP2 has the additional capability of providing provisionable power monitoring.
Figure 1-7
Note
The ONS 15600 supports only T1 (100 ohm) building integrated timing supply (BITS).
shows the location of the CAP or CAP2 on the back of the shelf.
Cisco ONS 15600 Reference Manual, R8.0
1.5 Cable Routing
1-7