- ページ 19

サーバー Cisco SNS-3495 seriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco SNS-3495 series 36 ページ。 Sns-3400 series
Cisco SNS-3495 series にも: 設置マニュアル (19 ページ), トラブルシューティングマニュアル (8 ページ)

Cisco SNS-3495 series インストレーション・マニュアル
Before You Begin

Rack Requirements

This section provides the requirements for the standard open racks.
The rack must be of the following type:
• A standard 19-in. (48.3-cm) wide, four-post EIA rack, with mounting posts that conform to English
• The rack post holes can be square 0.38-inch (9.6 mm), round 0.28-inch (7.1 mm), #12-24 UNC, or
• The minimum vertical rack space per server must be one RU, equal to 1.75 in. (44.45 mm).

Equipment Requirements

The slide rails supplied by Cisco Systems for this server do not require tools for installation. The inner rails
(mounting brackets) are pre-attached to the sides of the server.

Slide Rail Adjustment Range

The slide rails for this server have an adjustment range of 24 to 36 inches (610 to 914 mm).

Server Specifications

This section lists the technical specifications for the server:

Physical Specifications

The following table lists the physical specifications of the server.
Table 2: Physical Specifications
Description
Height
Width
Depth
Weight (fully loaded chasis)
universal hole spacing, per section 1 of ANSI/EIA-310-D-1992.
#10-32 UNC when you use the supplied slide rails.
Specification
1.7 in. (4.3 cm)
16.9 in. (42.9 cm)
28.5 in. (72.4 cm)
35.6 lb. (16.1 Kg)
Cisco SNS-3400 Series Appliance Hardware Installation Guide
Rack Requirements
15