- ページ 28

サーバー Cisco SNS-3515-K9のPDF ソフトウェアのインストールをオンラインで閲覧またはダウンロードできます。Cisco SNS-3515-K9 38 ページ。
Cisco SNS-3515-K9 にも：インストレーション・マニュアル (36 ページ)

ページを印刷する

Install Cisco ISE Software on Cisco SNS Appliances

Install Cisco ISE on the Cisco SNS 3515 or 3595 Appliance

The Cisco SNS 3515 and Cisco SNS 3595 appliances are preinstalled with the ISE software. This section

gives you an overview of the installation process and the tasks that you must perform before installing ISE.

Before you begin installing ISE, you must:

Step 1

Open the box and check the contents. See

Step 2

Read about the

Cisco SNS 3500 Series Appliances, on page

Step 3

Read the general precautions and safety warnings in

Step 4

Install the appliance in the rack. See

Step 5

Connect the Cisco SNS-3515 or Cisco SNS-3595 to the network and appliance console. See

19.

Step 6

Power up the Cisco SNS-3515 or Cisco SNS-3595 appliance. See

Appliance, on page

Step 7

Run the setup command at the CLI prompt to configure the initial settings for the ISE server. See

on page

32. The setup can be done by using the appliance console or CIMC.

You can use the

Cisco SNS-3595 appliance. You can also see the

SNS-3515 or Cisco SNS-3595 appliance.

Download the Cisco ISE ISO Image

Download the ISO image to install Cisco ISE on Cisco SNS appliance.

Step 1

Go to

http://www.cisco.com/go/ise.

Step 2

Click Download Software for this Product

The Cisco ISE software image comes with a 90-day evaluation license already installed, so you can begin testing all

Cisco ISE services when the installation and initial configuration is complete.

Install the ISE Server

After you download the Cisco ISE ISO image, you can use any of the following options to install and set up

the Cisco ISE software on your appliance:

Install Cisco ISE Software on Cisco SNS Appliances

Unpack and Inspect the Server, on page

Prepare for Server Installation, on page

22.

Cisco UCS Server Configuration Utility, Release 3.0 User Guide

You must already have valid Cisco.com login credentials to access this link.

Install Cisco ISE Software on Cisco SNS Appliances

Before You Begin, on page

Connect and Power On the Cisco SNS 3515 or 3595

Cisco UCS C-Series Rack Server guides

10.

11.

Connect Cables, on page

Run the Setup Program,

to configure the Cisco SNS-3515 or

for more information on Cisco