- ページ 4
サーモスタット finder 1C.71のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。finder 1C.71 6 ページ。 Touch screen weekly programmable chronothermostat
ページを印刷する
PROGRAMMING
Press
PRG
key to enter programming menu.
Selecting the day(s) to be programmed
Starting with day 1 (Monday) blinking, move down each day in turn by
using the
key.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
OK
During this process select using the
key those day(s) required to
have the same time/temperature profile. (Day(s) so selected will now
appear on a black background).
With the days selected, successively press the
temperature profile starts to blink. Then press
profile programming stage.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Programming the 24 hour time/temperature profile
With the zero hour segment of the profile blinking, select the desired
temperature level using the
keys.
OK
Pressing the
key confirms the setting and at the same time
programming advances to the next hour. This procedure is repeated
for setting the desired temperature level for each of the 24 hourly
segments.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
NOTE: to step back, use the
key. If pressed for >2 sec, programming
will be exited, saving those operations confirmed up to that moment.
7
(From main screen) Press
This allows the temperature level assigned to each hour to be modified
for just the following 24hour period. These levels will not be saved or
apply beyond the 24 hour period. Starting from the current hour, set
1
the temperature level using the
Pass to the next hour by the
2
3
OK
4
5
6
7
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
key until the time/
OK
to advance to the
After setting the temperature level for the final hour that requires
modification, do not press
1
and the Party profile will be accepted and will run – as shown by the
2
display of a rectangle with clockwise movement of the segments.
3
3
OK
4
5
5
6
7
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
To exit and cancel Party programming hold the
To cancel the Party function while running, press the
1
2
OK
4
6
7
PARTY FUNCTION
or
to enter into the party function.
key.
OK
key.
-- --
OK
OK
. Simply touch no key for > 3 seconds
OK
key down.
key once.
8
VACATION PROGRAM
Time -Temperature function
This function will maintain a single specific temperature over a specific
time period. Press the
key for 2 sec, then use the
OK
select the required time period and
to confirm.
1:28
Continue by setting the temperature and confirm with
°C
20:8
Following confirmation, a digital countdown plus a circular motion
graphic will be displayed. Touch
to view the set temperature.
T
To exit from the program, press the key
.
24 3h
T
NOTE
A time period of < 100hours is programmed in hours and minutes.
A time period of 100hrs to a maximum of 9999 hours (9999=416days)
is programmed in hours.
9
keys to
OK
OK
.
OK
IB1C71 - 08/11