- ページ 13

サーバー Cisco TelePresenceのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco TelePresence 24 ページ。 Configuring a cisco unified communications manager sip trunk with a cisco telepresence content server
Cisco TelePresence にも：パンフレット (4 ページ), 仕様 (7 ページ), インストレーション・マニュアル (4 ページ), 管理者マニュアル (27 ページ), クイック・リファレンス・マニュアル (2 ページ), 設置シート (2 ページ)

Chapter 3

Configuring a Cisco Unified Communications Manager SIP Trunk with a Cisco TelePresence

To add a route group to this list, click Add Route Group and perform Step 4 through Step 8 of the

"Adding Route Groups to a Route List" section.

Note

For called party and calling party transformation information, you can click the name of a route group

that belongs to this route list. The route group names display in the Route List Details list box at the

bottom of the Route List Configuration window. This action displays the Route List Detail Configuration

window for the route group that you choose.

Adding Route Groups to a Route List

You can add route groups to a new route list or to an existing route list. Route groups can exist in one or

more route lists. The following procedure describes adding a route group to an existing route list.

The following procedure describes to adding route groups to a route list:

Step 1

Choose Call Routing > Route/Hunt > Route List.

Step 2

Click Add Route Group.

The Route List Detail Configuration window displays.

Step 3

From the Route Group drop-down list box, choose a route group to add to the route list.

Step 4

If you need to manipulate the calling party number on calls that are routed through this route group, set

up the calling party transformations in the appropriate fields.

Step 5

If you need to manipulate the dialed digits on calls that are routed through this route group, set up the

called party transformations in the appropriate fields.

Step 6

Click Save.

The route group details information appears in the Route List Details list on the left side of the window.

Step 7

Click Add Route Group and repeat Step 3 through Step 7, to add more route groups to this list.

Step 8

Click Save.

Step 9

Click Reset for changes to take effect. When the popup windows display, click OK.

Configuring Route Pattern

The following procedure describes how to configure a route pattern:

Step 1

Choose Call Routing > Route/Hunt > Route Pattern.

Step 2

Click the Add New Button and continue with step 3.

Step 3

.Choose the gateway or route list for which you are adding a route pattern.

Cisco TelePresence Content Server Release 6.2.1 Administration and User Guide

CUCM Integration with Content Server 6.2

3-27