- ページ 12

スキャナー Epson ES-300CのPDF 製品サポート速報をオンラインで閲覧またはダウンロードできます。Epson ES-300C 13 ページ。 Laser & non-impact printer error codes
Epson ES-300C にも：製品サポート速報 (19 ページ), マニュアル (8 ページ), 補足マニュアル (15 ページ), マニュアル (11 ページ), 製品サポート速報 (20 ページ), 製品サポート速報 (14 ページ), 製品サポート速報 (25 ページ)

Q. How many pages can the EPI -4000 print before the ink cartridge needs to

be replaced?

A. In the Letter Quality mode the EPI - 4000 can print approximately 1000 pages

with 5% coverage.

2000 pages with 2.5% coverage.

Q. How do I change the default settings on the EPI-4000?

A. The printer's default setting are changed through the SelecType feature.

Follow the steps below to use SelecType:

1. Press ON - LINE button to enter off - line condition.

2. Press the SelecType button to enter SelecType mode.

3. Press the MENU button to chose a menu digit.

4. Press the < or > button to select the option digit.

5. Press the SET button to save the new setting.

6. Close the printer cover.

NOTE: Any changes that are made using the SelecType feature do not

take effect until they are saved by pressing the SET button after

each change.

Q. How much memory is in the EPI -4000? Can this memory be upgraded?

A. The EPI - 4000 comes standard with 512K of memory. To expand the

EPI-4000's memory to 2.5M, Epson offers an optional 2 megabyte memory

board.

Q. What size paper does the EPI -4000 support?

A. The EPI - 4000 supports up to 11x17 inch paper. When printing on paper

sizes other than letter size, change the paper size setting accordingly, using

the SelecType feature.

Q. Can the EPI -4000 print on envelopes?

A. The EPI - 4000 can print on plain, bond, or air mail type envelopes.

NOTE:

1. Envelope printing is only available at normal temperature.

2. Keep the longer side of the envelope horizontal.

In the Draft mode the EPI - 4000 can print approximately

PSB No: P-0668

Page: 3 of 4

Lift the printer cover.