- ページ 15

サーバー Cisco TelePresenceMCU 5300 SeriesのPDF はじめにをオンラインで閲覧またはダウンロードできます。Cisco TelePresenceMCU 5300 Series 20 ページ。 Multipoint control units

Calling participants in to a conference

To call participants in to a conference:

In the web interface of the MCU, go to

active conference.

On the

Participants

endpoint.

In the

Address

where there is no H.323 gatekeeper or SIP registrar, type the IP address,



host name, or SIP URI of an accessible endpoint on your network

if you are using an H.323 gatekeeper, enter the number/alphanumeric



H.323 id registered with the gatekeeper for the required endpoint

if you are using a SIP registrar, enter the number/alphanumeric URI



registered with the SIP registrar for the required endpoint

Leave the other fields as their default values and click

automatically connects to the endpoint.

If the endpoint is not configured to automatically answer calls, accept the call on

the endpoint.

Participants can call in to conferences in either one of two ways:

if you have given the conference a numeric identifier and you are using an H.323



gatekeeper or SIP registrar, tell participants to dial the numeric identifier from

their endpoint to join that conference

participants can dial the IP address of the MCU to access the auto attendant of



the MCU. Participants will see a menu of available conferences on their video

screen and will hear instructions

tab, click

Add participant

field:

and click on the name of an

Conferences

to call out to an H.323 or SIP

Call endpoint

Using the MCU

. The MCU